Originally posted by crzylildude
View Post
Announcement
Collapse
No announcement yet.
ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread
Collapse
This is a sticky topic.
X
X
-
Originally posted by pretentious-pasta View Posthi i was wondering if a set of 15x8 et25 with 225/55r15 or 215/55r15 will fit a 89 coupe on mild lowering springs (going for an old school street racer look so it doesn't matter if they stick out a little)
these are the wheels http://www.ebay.com.au/itm/15x8-Axis...16.m2518.l4276
Comment
-
Originally posted by TheWipprSnappr View PostIve got a 1990 325ix dropped apprx 1.5" from stock currently with oem 15x7 et41 basketweaves on 195/65/15s. Will my ix fit 15x8 et25 konig widopens with 195/55/15s or 205/50/15s without hitting the struts or wheelwell liner or having to roll the fenders?
Thanks for reading
Comment
-
I have a 91 325i, ls1 swapped, doing a 5 lug swap with z4 rear hubs (5mm+). I bought style 32 17x8 et20 17x9 et26, I am looking for what tire I can run.
I was thinking to run 235/40 r17 front and 245/40 r17 rears. they are both very close to each other and about 24.5" diameter.
Will it work fine?
I was looking at proxes r888LS1 91 325i - BC Coils, e46 m3 brakes,style 32 17x9, Red Plastidip, H/C/I
Comment
-
Fit question (2 different sets, same tire sizes):
205/55/15 (both sets). 1989 325 convertible lowered on H&R Sport w/ 15mm drophats up front.
Looking for info on fit of the following wheels:
15x7 ET10 (with 205/55/15)
15x8 ET20 (with 205/55/15)
Fit prognosis?Last edited by phenryiv1; 07-22-2015, 12:28 PM.
Comment
-
Wow ace thread.
I have a 1989 325i coupe and I am new to mods.
I would like to lower the 60mm and 40mm and I would like to add borbet type A 16inch 4x100 j9 et15 all round.
Would I need to use spacers?
Will my wheels rub on anything?
Will the wheels still point straight?
Will there be any camber issues?
Will I need to use spigot ring things?
Hope you guys can help.
Js
Sent from my Nexus 4 using Tapatalk
Comment
-
Originally posted by apiazza2010 View PostI have a 91 325i, ls1 swapped, doing a 5 lug swap with z4 rear hubs (5mm+). I bought style 32 17x8 et20 17x9 et26, I am looking for what tire I can run.
I was thinking to run 235/40 r17 front and 245/40 r17 rears. they are both very close to each other and about 24.5" diameter.
Will it work fine?
I was looking at proxes r888
Comment
-
Originally posted by phenryiv1 View PostFit question (2 different sets, same tire sizes):
205/55/15 (both sets). 1989 325 convertible lowered on H&R Sport w/ 15mm drophats up front.
Looking for info on fit of the following wheels:
15x7 ET10 (with 205/55/15)
15x8 ET20 (with 205/55/15)
Fit prognosis?
Comment
-
Originally posted by Js2010 View PostWow ace thread.
I have a 1989 325i coupe and I am new to mods.
I would like to lower the 60mm and 40mm and I would like to add borbet type A 16inch 4x100 j9 et15 all round.
Would I need to use spacers?
Will my wheels rub on anything?
Will the wheels still point straight?
Will there be any camber issues?
Will I need to use spigot ring things?
Hope you guys can help.
Js
Sent from my Nexus 4 using Tapatalk
No.
If they did before.
If there were before.
If the wheels require them.
Comment
-
Originally posted by Mystikal View PostZ4 hubs? Isn't that E46 stuff? What about the fronts?
Sent from my SM-N910T using TapatalkLS1 91 325i - BC Coils, e46 m3 brakes,style 32 17x9, Red Plastidip, H/C/I
Comment
-
Originally posted by Mystikal View PostFirst might rub occasionally front and rear. Offset a bit too low, but 205/50s would work. Second setup fits.
Comment
-
Originally posted by Mystikal View Post3-5mm front.
No.
If they did before.
If there were before.
If the wheels require them.
Will I need spacers on the front because I am fitting 9js? If I was to fit 7.5j on the front would I still need spacers? Is it normal to fit 9js all round?
Thanks again great help. JS
Sent from my Nexus 4 using Tapatalk
Comment
Comment