Originally posted by GunMetalGrey
View Post
Announcement
Collapse
No announcement yet.
ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread
Collapse
This is a sticky topic.
X
X
-
Originally posted by dmoney(AB) View Postalright
My wheels are 17x8.5 et13, I need an 8mm spacer with these wheels to clear my callipers.
What does this calculate into for the perfect offset? or am i reading completely wrong into this?
just trying to find a nice set of wheels that will work with the bbk.
You'll need a template (usually a .pdf) from the brake manufacturer to know for sure what fits.
Comment
-
Originally posted by noE30 View Post17" style 5s or style 19's, both 17x8 et 20. How doable would those be on a 89 coupe if you ran 18mm adapters? I haven't had any luck finding any one running something similar.
Might have to look for a place that can re drill.
Comment
-
Originally posted by mikeb23ft View PostThis question is noob as hell.
I found some E34 Style 29s for 100 bucks, I'm going to pick them up. They're obviously 5x120. I've searched around and don't see anybody running these on an E30 with adapters. Why is this?
Comment
-
Originally posted by Jozi View PostAt a guess I would say they would get pushed way out of the arches when using adapter as they normally are quite thick (20-25mm?).
Anyone run 16x9 et15 with 225/45/16's? Looking at a tyre size calc these are close to stock 205/55/15's. I can do what ever work is required before respray
Comment
-
Originally posted by jrgafer View Posthey guys, first post, im from guatemala central america, i want to buy some 16 esm 1 wheels 8 wider like DTM looks what offset i should use??? 20 or 35. Tire?? 205 i want 215 all around whith eichback spring
16x8 +20
205/50 or
215/45 or
225/45
Comment
-
Originally posted by Ian Bowers View Post245/40-17 or 235/40-17 on a 17x8.25 with ET20.
E30 M3 Front/rear fiberglass quarters. Possible? I can "space" the rear fender out if I need to. I know I'm running into the issue of the tires being oversized (diameter), but it's a track/drift car. What size spacer would you recommend, if any?
Comment
-
I am looking into rubber for a set of wheels I have. I do not know what is a proper tire size that is good with the s50, any ideas? Wheels are 16x7 et37 and I'll be running 10mm spacer front and rear. Also I don't know how far the wheels will sit, anyone have a close setup that I can see photos of? Thanks in advance, my wheel/tire knowledge isn't great
Patrick - IG:niicknac
RIP 1987 BMW 325is - S50'd ZF 6-speed, flared, bagged
Comment
-
Originally posted by e30shmobberr View PostI am looking into rubber for a set of wheels I have. I do not know what is a proper tire size that is good with the s50, any ideas? Wheels are 16x7 et37 and I'll be running 10mm spacer front and rear. Also I don't know how far the wheels will sit, anyone have a close setup that I can see photos of? Thanks in advance, my wheel/tire knowledge isn't great
Comment
Comment