ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread

Collapse
This is a sticky topic.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Jand3rson
    Banned
    • Oct 2003
    • 37587

    #7651
    Jay, what's a decent tire in 205/50/16 that doesn't have a super tall sidewall? I've got 204/45 Federals right now, and I really don't like them much, plus it's getting close to time for new tires. Along with that, I'd like to fill my wheel wells a tad more with the correct size, but the 205/50 Feds I had on there before looked gargantuan. What do you recommend? The looks of a tire are important to me. Thanks!

    Comment

    • Mystikal
      Moderator
      Wheel Fitment Expert
      • Nov 2003
      • 9602

      #7652
      Originally posted by funcrew
      Jay,

      When test-fitting my new Konig Flatout 15X8 ET25 and BFG Rival 225-45-15 they rub on my '91 325i OEM front struts. Didn't expect that from this combo.

      How can I tell what size spacers I need? Are cheap spacers OK, or if not, who should I source them from? Any help would be appreciated.
      Yeah, +25 is too much for a 15x8. 5mm universal spacers with longer bolts are what you need.

      Comment

      • Mystikal
        Moderator
        Wheel Fitment Expert
        • Nov 2003
        • 9602

        #7653
        Originally posted by elcoy
        Will TRM Motorsport 15x8 with Hoosier 225/50ZR15 fit on a 91 325is with bilstein sports and GC coilovers?
        __________________
        What offset are they?

        Comment

        • Mystikal
          Moderator
          Wheel Fitment Expert
          • Nov 2003
          • 9602

          #7654
          Originally posted by Jand3rson
          Jay, what's a decent tire in 205/50/16 that doesn't have a super tall sidewall? I've got 204/45 Federals right now, and I really don't like them much, plus it's getting close to time for new tires. Along with that, I'd like to fill my wheel wells a tad more with the correct size, but the 205/50 Feds I had on there before looked gargantuan. What do you recommend? The looks of a tire are important to me. Thanks!
          215/45. Tire sidewall height varies very little brand to brand, it's the section and tread widths that are all over the board. The 215/45 will be right between those two tires in height though.

          Comment

          • Jand3rson
            Banned
            • Oct 2003
            • 37587

            #7655
            Thanks! Got a specific tire?

            Comment

            • G-Man the Visionary
              E30 Addict
              • Apr 2013
              • 543

              #7656
              Originally posted by Mystikal
              Yeah, +25 is too much for a 15x8. 5mm universal spacers with longer bolts are what you need.
              So would this same rim fit with a narrower tire, or still need spacers? Say, 195-205?
              Thanks
              sigpic
              Streetable poly mounts, trans mounts are here!
              http://www.r3vlimited.com/board/show...ght=streetable
              '94 318i
              '07 335i
              '11 X5
              '89 325ic m30b35

              Comment

              • bmwmaniac2
                Noobie
                • Jun 2014
                • 14

                #7657
                Jay the master,
                how about a quick educated guess at this setup tyre and rim size etc?


                I really like the stance on this

                Comment

                • Terroth
                  Noobie
                  • Jul 2014
                  • 22

                  #7658
                  Will they fit / what tyre sizes to run on
                  - 15x8 ET20
                  OR
                  - 15x8 ET0

                  Any gaurd rolling / pulling necessary? I Currently run 15x7 ET15 with some of the guards rolled and haven't experienced any problems

                  Lowered on Koni adjustable struts and King competition springs.

                  Comment

                  • Randy2400
                    Member
                    • Apr 2014
                    • 55

                    #7659
                    Looking to purchase 16x8 Rota Grids but I don't want to run spacers, I need them to fit over the Ireland Engineering 310mm BBK.
                    What offset should I purchase?
                    et 20
                    et 10
                    et 0
                    Also what size tires should I run for the front and rear, I plan to run slicks

                    Comment

                    • Mystikal
                      Moderator
                      Wheel Fitment Expert
                      • Nov 2003
                      • 9602

                      #7660
                      Originally posted by Jand3rson
                      Thanks! Got a specific tire?
                      Finding anything that's still produced in our sizes is a victory in itself. Add www.onlinetires.com to the usual www.tirerack.com and www.discounttiredirect.com searches.

                      Comment

                      • Mystikal
                        Moderator
                        Wheel Fitment Expert
                        • Nov 2003
                        • 9602

                        #7661
                        Originally posted by G-Man the Visionary
                        So would this same rim fit with a narrower tire, or still need spacers? Say, 195-205?
                        Thanks
                        Still needs spacers, the wheel itself will rub the struts. Will just clear with a 3mm though.

                        Comment

                        • Mystikal
                          Moderator
                          Wheel Fitment Expert
                          • Nov 2003
                          • 9602

                          #7662
                          Originally posted by bmwmaniac2
                          Jay the master,
                          how about a quick educated guess at this setup tyre and rim size etc?


                          I really like the stance on this
                          Hard to judge from the angle and stepped lips, but something like 16x8.5 +15 16x9.5 +15 would work wonderfully.

                          Comment

                          • Mystikal
                            Moderator
                            Wheel Fitment Expert
                            • Nov 2003
                            • 9602

                            #7663
                            Originally posted by Terroth
                            Will they fit / what tyre sizes to run on
                            - 15x8 ET20
                            OR
                            - 15x8 ET0

                            Any gaurd rolling / pulling necessary? I Currently run 15x7 ET15 with some of the guards rolled and haven't experienced any problems

                            Lowered on Koni adjustable struts and King competition springs.
                            +20. Run 205/50s and you'll clear for sure, with 225/45s you might need to roll a bit more depending on where you're at now.

                            Comment

                            • Mystikal
                              Moderator
                              Wheel Fitment Expert
                              • Nov 2003
                              • 9602

                              #7664
                              Originally posted by Randy2400
                              Looking to purchase 16x8 Rota Grids but I don't want to run spacers, I need them to fit over the Ireland Engineering 310mm BBK.
                              What offset should I purchase?
                              et 20
                              et 10
                              et 0
                              Also what size tires should I run for the front and rear, I plan to run slicks
                              +20. 225/45/16. Needs a rear roll to work. Caliper clearance is a mystery.

                              Comment

                              • nickyatm650
                                Wrencher
                                • Jul 2013
                                • 290

                                #7665
                                What tires to run with staggered style 32 wheels 17x8 front (et 20)17x9 rear (et 26). With 20 mm adaptors.

                                Thanks!
                                sigpic

                                Comment

                                Working...