V710 won't hold air

[JGood]

I have a set of v710's, and 1 tire just kind of stopped holding air. It's a slow leak, maybe looses 2-3 psi per day. Any ideas? Maybe a remount/balance? They held air fine all summer.

[netcsk]

It's usually a nail. Take it anywhere that does tire work and they'll find the problem for you.

[Hick]

Check bead leaks also, take soapy water and spray the entire tire down, look for a leak.

Even the core of the valve stem could cause it.

[JGood]

It's usually a nail. Take it anywhere that does tire work and they'll find the problem for you.

I checked for nails. I use the tires for track days, they definitely get inspected after every session...

I don't think it's leaking fast enough for the bubble trick to work, like I said, 2-3 psi per day.

I'll just have it remounted and put in a new valve stem.

[Farbin Kaiber]

I checked for nails. I use the tires for track days, they definitely get inspected after every session...

I don't think it's leaking fast enough for the bubble trick to work, like I said, 2-3 psi per day.

I'll just have it remounted and put in a new valve stem.

"Bubble" trick always works, you just have to take it to a shop with a full submurge tank and hold it under the water level. once the waves stop even a 1 psi leak will show.

[JGood]

"Bubble" trick always works, you just have to take it to a shop with a full submurge tank and hold it under the water level. once the waves stop even a 1 psi leak will show.

Well I can submerge the tire in water. I'll just chop a 55 gal drum in half. I just didn't think I would see bubbles from a leak that slow. But I guess the air has to come out somehow...