Parting: 1994 530i - Wisconsin

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • straight6pwr
    No R3VLimiter
    • Sep 2004
    • 3450

    #1

    Parting: 1994 530i - Wisconsin

    UPDATED - Below is what I have left. If you don't see it, assume I dont have it.

    Parting out an e34. Pictures/descriptions of parts available on request if I haven't posted something about them yet.

    Feel free to message me here, post here, email me straight6pwr at gmail.

    Non-local sales will have actual shipping added to the prices. I accept Paypal for internet sales.

    I have been a e30/r3vlimited member for a longtime with a good reputation, and have feedback in the feedback section: http://www.r3vlimited.com/board/show...t=straight6pwr

    Near perfect gray dash. I got it all out without damaging, there are only two little marks up by the defroster vents that you can't hardly see anyways.
    This car was one with the passenger airbag. Will get pics. $30







    Taillights(inner and outer) in great shape. $20 for all 4 pieces










    Fan + fan clutch. I put this on my running car and used it for a few days, no problems. $40



    e34 factory leather ebrake handle. a great upgrade for e30 guys. $15



    Infinity Kappa 52.1i/50.2cs speaker system. i'm no stereo guy, but I looked these up and they seem like pretty good stuff and were a couple hundred bucks when new. (they are a little dusty, but are undamaged, and I ran the radio before taking the car apart and they all had sound) $40



    Factory BMW/Alpine remote entry system. Will come with everything needed, except the car had no remote for your keychain. (Receiver, harness, glass break sensor/LED light, and antenna) $75

    Window glass/motors

    Rear view mirrors $20/pair

    Wiper motor

    Brand new fuel pump/sender (will check brand)
    Last edited by straight6pwr; 04-09-2015, 04:47 PM.
  • Gooch
    E30 Mastermind
    • Dec 2006
    • 1674

    #2
    I wonder how terrible shipping the driver's door panel would be.

    '91 318is - OBD-II S52 swapped - E30 M3 5-lug - 5x120 BBS RC090 (E39 Style 5) - TCK D/A coilovers 550/700 [SOLD]
    '87 535i - Vacuum brake conversion [SOLD]
    '93 525iT - 5-speed swap - 320k and counting
    '09 328xi - 6-speed

    Comment

    • straight6pwr
      No R3VLimiter
      • Sep 2004
      • 3450

      #3
      how much of the door panel do you need? door pull? wood trim? door handle?

      Comment

      • Nick_S
        No R3VLimiter
        • Apr 2011
        • 3656

        #4
        I need one door seal shipped to 90802. How many monies?
        91 318is M50 swapped
        05 Honda Pilot

        24V swap thread
        http://www.r3vlimited.com/board/showthread.php?t=302524

        Comment

        • straight6pwr
          No R3VLimiter
          • Sep 2004
          • 3450

          #5
          nick_s, which seal do you want? should be able to get it in a smallish flatrate box. $15 shipped.

          Originally posted by Nick_S
          I need one door seal shipped to 90802. How many monies?
          Last edited by straight6pwr; 02-21-2015, 03:40 PM.

          Comment

          • Gooch
            E30 Mastermind
            • Dec 2006
            • 1674

            #6
            Originally posted by straight6pwr
            how much of the door panel do you need? door pull? wood trim? door handle?
            I need the whole thing. I just bought an alpine touring that has a dove interior and the drivers door panel is black. But if you don't want to ship I understand.

            I also need the glovebox wood trim because mine is cracked basically in two.

            '91 318is - OBD-II S52 swapped - E30 M3 5-lug - 5x120 BBS RC090 (E39 Style 5) - TCK D/A coilovers 550/700 [SOLD]
            '87 535i - Vacuum brake conversion [SOLD]
            '93 525iT - 5-speed swap - 320k and counting
            '09 328xi - 6-speed

            Comment

            • straight6pwr
              No R3VLimiter
              • Sep 2004
              • 3450

              #7
              ok, will check the condition and takes some photos and get a quote.

              Comment

              • straight6pwr
                No R3VLimiter
                • Sep 2004
                • 3450

                #8
                Originally posted by Gooch
                I need the whole thing. I just bought an alpine touring that has a dove interior and the drivers door panel is black. But if you don't want to ship I understand.

                I also need the glovebox wood trim because mine is cracked basically in two.
                the panel ended up being garbage. it was in good condition, but some numbnuts used expanding foam between the door pull and the panel.(?) it was seriously oozing out all around the edges, and even when I scraped it off, left a stain. sorry! anyways the glovebox trim is in really good shape, couple light scratches. $15 shipped. PM me if you want it.

                Comment

                • straight6pwr
                  No R3VLimiter
                  • Sep 2004
                  • 3450

                  #9
                  some more parts sold, updated original post.

                  Comment

                  • Dj Buttchug
                    R3V OG
                    • Jun 2010
                    • 7632

                    #10
                    does the OBC work properly? Interested in that and If you would seperate 1 style 9. I need a spare lol

                    If not nbd

                    Turbo M42 Build Thread :Here
                    Ig:ryno_pzk
                    I like the tuna here.
                    Originally posted by lambo
                    Buttchug. The official poster child of r3v.

                    Comment

                    • straight6pwr
                      No R3VLimiter
                      • Sep 2004
                      • 3450

                      #11
                      i'd rather not split the style 9s. They arent worth much as it is, 3 of them would just be paper weights. if they dont get sold after a bit, i may split them for you at that point. I will check the OBC. It was on showing the date when I bought the car, but I'll put things back together to look.

                      Comment

                      • 95maxrider
                        Grease Monkey
                        • Oct 2012
                        • 393

                        #12
                        Any chance I could get the rear upper strut mounts?

                        #4 in this diagram:
                        http://www.realoem.com/bmw/showparts...34&hg=33&fg=45

                        Thanks!

                        ________________________1988 528e Rally-xmobile___________________
                        2014 WDCR Rally-X MR Season Champion, 2014 NE Div. Challenge MR Winner

                        Comment

                        • straight6pwr
                          No R3VLimiter
                          • Sep 2004
                          • 3450

                          #13
                          Originally posted by 95maxrider
                          Any chance I could get the rear upper strut mounts?

                          #4 in this diagram:
                          http://www.realoem.com/bmw/showparts...34&hg=33&fg=45

                          Thanks!
                          thats a lot of effort for some old used strut mounts. what were you hoping to pay?

                          Comment

                          • 95maxrider
                            Grease Monkey
                            • Oct 2012
                            • 393

                            #14
                            Originally posted by straight6pwr
                            thats a lot of effort for some old used strut mounts. what were you hoping to pay?
                            Actually, never mind. I didn't realize I could buy them new for $11 each :p

                            ________________________1988 528e Rally-xmobile___________________
                            2014 WDCR Rally-X MR Season Champion, 2014 NE Div. Challenge MR Winner

                            Comment

                            • straight6pwr
                              No R3VLimiter
                              • Sep 2004
                              • 3450

                              #15
                              Originally posted by 95maxrider
                              Actually, never mind. I didn't realize I could buy them new for $11 each :p
                              ok, glad we're on the same page.

                              Comment

                              Working...