Is it possible to directly replace a 3 liter V 8? with a 4.4 non vanos? Vehicle in question is a 95 530 I
Announcement
Collapse
No announcement yet.
4.4 into e34??
Collapse
X
-
the m60 4.0 is basically plug and play, but 4.4 isn't.
You'll need to convert the m62 4.4 to obd1 to run in the e34, or make a hybrid m62 using parts from the 4.0 m60.
3.0 m60 intake/throttle/heads/valves are different from the 4.0
3.0 and 4.0 share the same oil pans/timing covers upper and lower, but the internals are not the same, cams are though.
example -
3.0 cams on the 3.0 and 4.0
11311736117 on the 4.0 = 11311736117
11311736131 on the 4.0 = 11311736131
11311736119 on the 4.0 11311736119
11311736133 on the 4.0 11311736133
intake valve 32,0/5.94 11341435476 on the 4.0 35/5.94mm 11341435480
exhaust valve 28.5/5.94 11341435478 on the 4.0 30.5/5.94 11341435482
lower timing cover 11141733522 / on the 4.0 = 11141733522
upper covers 11141729583 / 11141729585 / on the 4.0 11141729583 / 11141729585
head 11121731912 / 11121731913 on the 4.0 = 11121731910 / 11121731911
Obviously 4.4 cams are totally different as well, along with the heads too.Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205
OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827
Comment
Comment