Value of rebuilt ATE brakes

[iXBeater]

yeah why try to draw attention to them, the OE design is not aesthetic and they dont clean well

I'm not sure how you mean - these are marinating in Evaporust after a run in the ultrasonic cleaner with PurplePower

My original plan was to smack 'em with a wire wheel on my die grinder, but a regular wire brush might be all they need...
(I'm not going to go full-MyMechanics on them and file away casting marks/etc.)

But after three coats of the VHT caliper paint I'm guessing they'll be pretty decent...

[digger]

I'm not sure how you mean - these are marinating in Evaporust after a run in the ultrasonic cleaner with PurplePower

My original plan was to smack 'em with a wire wheel on my die grinder, but a regular wire brush might be all they need...
(I'm not going to go full-MyMechanics on them and file away casting marks/etc.)

But after three coats of the VHT caliper paint I'm guessing they'll be pretty decent...

On the car they are not going to be clean and get dirty quickly so it’s fairly pointless if you actually use the car imo. Make them inconspicuous imo

[iXBeater]

On the car they are not going to be clean and get dirty quickly so it’s fairly pointless if you actually use the car imo. Make them inconspicuous imo

Agree.

[iXBeater]

They're coming out decent...

(I lied about resisting the urge to knock down the casting marks...

[iXBeater]

FWIW - this is what I've stared from: