What jack do you like? To take to Autocross

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • nrubenstein
    replied
    When it comes to something to throw in the trunk, it's almost impossible to beat the Harbor Freight jack.

    Leave a comment:


  • Scotaku
    replied
    I've owned both the 14" lift Harbor Freight/US General and the 18" OTC 1532...

    They're both made in China and while the HF ultimately failed, it did so only after a good five years of use in my garage and various paddocks. I attempted to repair it given the parts list and exploded view diagram found online, but the construction and materials did not lend themselves to the process; the valve body stripped with just handtools. It was worth the effort to try, but also tipped me toward the OTC...

    The OTC has all the appearances of the HF jack save for the taller lift height and a dual chamber pump that lifts the saddle to the frame quickly. I use a nylon jack pad slotted to lift at the pinch rail. Though made in China, OTC warrants the jack for life.

    Studying the HF and the OTC side by side, I theorized why the HF failed the way it did (won't lift any weight, barely lifts the saddle). I believe I may have fouled the lifting valve and reservoir seals by transporting the jack on it's side one too many times. I used to wedge it in with wheels and tools wherever it would fit when goin to the track. I recall right before it failed that there was hydraulic fluid leaking from somewhere when I pulled it out of the car that final trip. reading back through the manual in attempting to fix it, I found something about not tipping the jack over or carrying it upright at all times... :(

    My new jack will stay right side up whether stored or being carried.

    Leave a comment:


  • FredK
    replied
    Originally posted by hoveringuy
    For my regular garage jack I have a steel Craftsman. It's durable, but my biggest complaint is that I need to jack my car to get the jack underneath it. I usually drive onto some 2x6's to get the front end high enough to get the jack underneath.

    I would love a long, low jack to make it easier.
    I just got a Blackhawk 29023. It fits underneath a low-ish suspension up front with an is lip. No screwing around with wood, ramps, etc.

    Leave a comment:


  • graphikg
    replied
    I checked the reviews on the costco alluminum one and they did not look too good.

    Leave a comment:


  • 2002maniac
    replied
    I have 3 aluminum jacks. Their usefulness can be ranked in this order:

    Small HF, awesome clearance. I use this one the most

    Large HF, good height

    Large Craftsman, pumps up quicker than the others, but needs to be bled often. hydraulics suck.

    Leave a comment:


  • nando
    replied
    I don't remember, it was several years ago - somebody posted a thread about them, everybody thought they were stupid. I bought a set and couldn't be happier. Found them on some import tuner website for about $75. I think griot's garage sells something similar.

    Leave a comment:


  • bmws50b30
    replied
    Originally posted by nando
    easy solution - low profile ramps. No more driving up onto blocks to get my car onto ramps so I can jack the thing up. lol.
    hmmm...where can you buy these? i haven't seen a ramp low enough for my car. it always catches the IS lip. most of the time i just remove the lip before driving up the ramp but i end up breaking the clips :o or if i'm lazy i drive on a piece of wood then up the ramp.

    Leave a comment:


  • nando
    replied
    Originally posted by hoveringuy
    For my regular garage jack I have a steel Craftsman. It's durable, but my biggest complaint is that I need to jack my car to get the jack underneath it. I usually drive onto some 2x6's to get the front end high enough to get the jack underneath.

    I would love a long, low jack to make it easier.
    easy solution - low profile ramps. No more driving up onto blocks to get my car onto ramps so I can jack the thing up. lol.

    Leave a comment:


  • hoveringuy
    replied
    For my regular garage jack I have a steel Craftsman. It's durable, but my biggest complaint is that I need to jack my car to get the jack underneath it. I usually drive onto some 2x6's to get the front end high enough to get the jack underneath.

    I would love a long, low jack to make it easier.

    Leave a comment:


  • wolfgangstbd
    replied
    i like Torin tools aluminnum racing jacks. my friends has one i really like it haha. theyre pretty damn light too

    Leave a comment:


  • joonsup
    replied
    i just picked up the $99 Harbor Freight one this past monday. I had a 20% off coupon to use so I had expected to pay around $80 plus tax. I guess the jack was on sale for $80 so I ended up paying a little under $70 after tax.

    It was the US general aluminum jack that normally goes for $99. I've heard a lot of good things about the jack and a few bad ones. I think for the price it's pretty good.

    Leave a comment:


  • dannyg
    replied
    Originally posted by backtrail69
    I have been using that one for a couple years now, if and when it breaks i will just bring it back for a full refund. :P

    That's why I thought, but they only have a 1 year warranty. They don't even sell the parts to fix the seals. My fist one crapper out within the first year, but this one I've had for a few years so I'm screwed.

    Leave a comment:


  • mentaleeill
    replied
    my aluminum craftsmen just took a shit on me the other day. ive been through 2 of the cheaper harbor freight aluminum ones, next i think i will get the one for 175 from hf.

    Leave a comment:


  • JGood
    replied
    I got the $100 harbor freight special, and like everyone else said, it is amazing. The handle easily breaks down into two pieces, so it's easy to transport. My buddy uses it on his crew cab diesel F250, and I use it at least weekly on my cars and truck. I've had it for 2 years now, it still works perfect.

    Leave a comment:


  • Eric
    replied
    i use the harbor freight one. i took it to the track and auto-x almost every weekend for 3 summers straight. worked like a champ every time.

    shipping it here to germany messed it up a bit though. there is air in it somewhere so it doesn't pump as well as it used to. i tried to bleed it but didn't get it right as it changed nothing.

    it's definetly worth the $150 i paid 6 years ago

    Leave a comment:

Working...