Allow myself to introduce....... myself

[E30Rookie37]

Jesus tapdancing christ....That is a beutyyyy.

[ja burna]

That could also work also.. Thats if u want to cut ur hood up for such an opening..

Should also work for the euro s50's as well

[mohamadr89]

Actually the performance is quite substantial but as you can see there is no cold air feed pipe connecting it to the front of the car to get in more cooler air.. Since this engine is compression and runs quit hot this is necessary.. The BMC CDA box actually gave me an additional 7hp and the sound is great... it will work on an S50 or any other vehicle since this is a universal air box....

I will take a pic with the cold air feed pipe attached.. Its not good as is because it just sucks in hot air...

i wonder if ypu can put a heat shield under the filters that blocks the the hot air from getting into them, then cutting out a hood scoop to feed them cold air! that would be sick. will it only work on a euro s550 or a s50b30us aswell? thanks

[kalib0y]

looking good!

[KamakaziX]

Holy thread hijack, Batman!

[ja burna]

Actually the performance is quite substantial but as you can see there is no cold air feed pipe connecting it to the front of the car to get in more cooler air.. Since this engine is compression and runs quit hot this is necessary.. The BMC CDA box actually gave me an additional 7hp and the sound is great... it will work on an S50 or any other vehicle since this is a universal air box....

I will take a pic with the cold air feed pipe attached.. Its not good as is because it just sucks in hot air...

[mohamadr89]

I love your project! How big of a difference performance wise is it with those filter cones on the end of your itb's? I never seen that done before? Was it hard to do and can it be don't to a s50? Thanks

[ja burna]

Updated pics of the S38 install..

[wannaBMthree]

uuuuuuupdates???

[ja burna]

Brakes will be the porsche boxster set-up.. 4 piston front and rear with 312mm rotors front and 300 mm rotors rear.. lets see how it works!

[ja burna]

Wheels and brakes and suspension are another factor one has to consider when doing this swap..

Wheels are Schmidt CC-line(black) 17" 215/40 10mm spacers front 15mm rear.

Brakes, going to use massive lees set-up but the 332x32 mm rotor. Still have to contact him to discuss..

Suspension will H&R.. Haven't decided on the exact set-up.

[accident]

i came

[8380 Labs]

some tires that were appropriately sized for 17s on an e30 would be good as well, and probably help with the overall look with the MT1 kit.

impressive project.

[ja burna]

Thanx guys, I'll post more up probably tomorrow.. I go down and see the progress tomorrow.

[ILoveMPower]

Wow, superb projects. Looking forward to more updates

The orange reminds me of Jagermeister race car :D