Mega Squirt question

[der affe]

what would you recomend for wires or will any cut to fit wires do?

[nando]

you're building a PnP MS right? with the stock harness? cut off the AFM connector and use the IAT wires from that. You can find the wire colors in my adapter chart:
http://www.325ix.com/megasquirt/MS_t..._motronic.html (air mass sensor #1 and #4).

polarity doesn't matter as it's just a resistor and works both ways.

[der affe]

thanks! i will need that since i have the split second kit i will be removing and it was wired into the AFM harness.

what i meant was plug wires though. mine are pretty new so i was going to sell them on the forum and buy some good quality (magna core?) cut to fit wires for the wasted spark.

[der affe]

oh yea, and it is the PNP kit that uses the stock harness.

[nando]

thanks! i will need that since i have the split second kit i will be removing and it was wired into the AFM harness.

what i meant was plug wires though. imine are pretty new so i was going to sell them on the forum and buy some good quality (magna core?) cut to fit wires for the wasted spark.

oh, plug wires. yeah, make your own. i got ends from summit, and cut up my bavauto wires. my coils are mounted in the battery tray area, some people put them on the firewall.