Washers and longer bolts 
If you have an idea, post it.
Fingerflexers waste your time.
If you have an idea, post it.Fingerflexers waste your time.
-
Last edited by jeffluvse30s; 10-03-2009, 03:21 AM.- " Ill Never again argue with an idiot. They bring you down to their level and try to beat you with experience."
http://www.flickr.com/photos/13617577@N04/ -
stop with the retarded posts.
-
Prolly the dumbest idea ever....
Unless you don't value your life
'89 325i - Totaled... good bye my love...
'87 327i budget stroker - SOLD!!!
'92 240sx - ca18det powered drift toy - SOLD!!!
'89 325i - coupe - NEW daily
'96 Audi A6 Quattro- Grocery getter/baby hauler
'99 Busa - weekend wheelie monsterComment
-
please see link......
http://www.albinoblacksheep.com/flash/posting
On another note, as a person that is around said items often, this has to be one of the most unsafe and horrible ideas i have ever heard and i pray that you were just joking.Need Custom spacers and adapters?
PM for informationComment
-
Sounds like a good idea. Go test it! And remember it isn't a good test unless you're going fast.Originally posted by jeffluvse30s View PostWashers and longer bolts If you have an idea, post it.
Fingerflexers waste your time.Jah bless! :pimp:Comment
-
you could use cheese instead of washers.
S50'd
Originally posted by TDE30Originally posted by slammin.e28Comment
-
yes but if you go with cheese make sure you dont use swiss as the holes compromise the spacer's integrityComment
-
Is this for serious? Probably the most dumb ass thing Ive heard.
OP... please update us on the results..oh wait. You wont be able to cause you will be fckin dead, you moron!!sigpic 1987 325isComment
-
Swiss it is. Ha, i thought i chose the sarcastic icon.- " Ill Never again argue with an idiot. They bring you down to their level and try to beat you with experience."
http://www.flickr.com/photos/13617577@N04/Comment
-
-
Men the previous owner did that to the 240sx I previously owned and I never knew it. Try explaining that to the new owner that was like WTF what just fell.
Comment
-
I have cut up old rotors for spacers......just cut the center out.....the bolt patterns perfect and everything.
BUT THIS!!!!! http://www.r3vlimited.com/board/showthread.php?t=194272
Comment
-
-
what about maching your own spacers
provided you purchased the correct stock and right material to start with.
I have access to a mill, just never thought of turning some spacers.Comment
-
i dont know shit about wheels, and even i know this is a stupid idea.
SC*AR
Originally posted by JamesE30Comment
Comment