Idea's for DIY spacers...

[jeffluvse30s]

Washers and longer bolts If you have an idea, post it.
Fingerflexers waste your time.

[TwoJ's]

stop with the retarded posts.

[slo325i]

Prolly the dumbest idea ever....

Unless you don't value your life

[e30Rob]

please see link......

http://www.albinoblacksheep.com/flash/posting

On another note, as a person that is around said items often, this has to be one of the most unsafe and horrible ideas i have ever heard and i pray that you were just joking.

[Streichholzschächtelchen]

Washers and longer bolts If you have an idea, post it.
Fingerflexers waste your time.

Sounds like a good idea. Go test it! And remember it isn't a good test unless you're going fast.

[Lof8]

you could use cheese instead of washers.

[lennon]

yes but if you go with cheese make sure you dont use swiss as the holes compromise the spacer's integrity

[txtorquemade]

Is this for serious? Probably the most dumb ass thing Ive heard.

OP... please update us on the results..oh wait. You wont be able to cause you will be fckin dead, you moron!!

[jeffluvse30s]

Swiss it is. Ha, i thought i chose the sarcastic icon.

[Mo_E30]

Prolly the dumbest idea ever....

Unless you don't value your life

:stupid:

[ThaiRacer]

Men the previous owner did that to the 240sx I previously owned and I never knew it. Try explaining that to the new owner that was like WTF what just fell.

[EricT]

I have cut up old rotors for spacers......just cut the center out.....the bolt patterns perfect and everything.

[gearheadE30]

Fail.

[iwantspeed]

what about maching your own spacers
provided you purchased the correct stock and right material to start with.

I have access to a mill, just never thought of turning some spacers.

[Alkasquawlik]

i dont know shit about wheels, and even i know this is a stupid idea.