Announcement

Collapse
No announcement yet.

'01 dodge neon engine missing?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    They will get a P-code, I don't know how much more specific you'd want.

    Comment


      #17
      I think a code for cylinder 4 misfire is a pretty good indication. ;)

      Pretty much says, check the plug, check the coil, check the injector, check the wiring to those things.
      BimmerHeads
      Classic BMW Specialists
      Santa Clarita, CA

      www.BimmerHeads.com

      Comment


        #18
        OP - good luck! In my case I was just getting a P0304? misfire on cyl # and putting new plugs/wires/set of injectors/coil(s) didn't do a thing. Even checked compression and it's even on all four. It misfires hard enough to notice it running rough, and it does this usually right after filling the car up.
        Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



        OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

        Comment


          #19
          Didja check FP Jean? Maybe a sticky injector. Or, valve adjustment. Was there a random misfire code too?

          Comment

          Working...
          X