If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
thats what i was aiming for :)
perfect opportunity to get the lawls haha.
Spend more time in the DIY/tech sections. The OT and General sections hold next to nothing in know how. Builds are the BEST place to learn, most have pictures <3
Spend more time in the DIY/tech sections. The OT and General sections hold next to nothing in know how. Builds are the BEST place to learn, most have pictures <3
thanks for the tippers,
ive been checking out a few DIY's
i'm not very mechanically experienced but i'm getting better at it,
next day off i'm cleaning out me ICV
but the one thing i'm not sure on how to tackle is the cooling system issues i have :/
also the tranny popping out of second,
i'm either going to take it to the local german autowerkes shop (long time trusted)
or possibly drive it to dannys new garage and see if he can assist me :)
thanks for the tippers,
ive been checking out a few DIY's
i'm not very mechanically experienced but i'm getting better at it,
next day off i'm cleaning out me ICV
but the one thing i'm not sure on how to tackle is the cooling system issues i have :/
also the tranny popping out of second,
i'm either going to take it to the local german autowerkes shop (long time trusted)
or possibly drive it to dannys new garage and see if he can assist me :)
~When you clean your ICV use a throttle body cleaner. It is made for such things that have sensors.
~The tranny might be low on fluid, or the gearing is on it's last leg.
~Buy a Bentley manuel off of amazon
~Go to Danny, support members and he is a good guy.
~When you clean your ICV use a throttle body cleaner. It is made for such things that have sensors.
~The tranny might be low on fluid, or the gearing is on it's last leg.
~Buy a Bentley manuel off of amazon
~Go to Danny, support members and he is a good guy.
good point, i need to check the fluid in there, and yeah ill go with danny, it would be more of a learning experience as well :P
Comment