will E36 work on E30 (help)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • SedanElRey787
    Member
    • Apr 2011
    • 45

    #1

    will E36 work on E30 (help)

    ok my question is, will 99 m3 lowering springs work on a 91 318i???
  • mamzak
    E30 Modder
    • Mar 2010
    • 883

    #2
    I'm 75% sure they won't.
    Originally posted by Dozyproductions
    All girls fuck but not all girls fuck around with combustion engines.

    Comment

    • freeride53
      R3V OG
      • Jul 2007
      • 11972

      #3
      you have a 91 318i.
      Used springs for our cars go for like $150.

      1991 BMW 318i (Old Shell RIP, Now Being Re-shelled & Reborn)
      1983 Peugeot 505 STI
      1992 Volvo 240 Wagon
      2009 Toyota 4Runner SR5 Sport 4WD

      Comment

      • SedanElRey787
        Member
        • Apr 2011
        • 45

        #4
        Originally posted by freeride53
        you have a 91 318i.
        Used springs for our cars go for like $150.
        would you happen to know were i could find some???

        Comment

        • jeswaw
          Grease Monkey
          • May 2008
          • 337

          #5
          Check the classifieds man.

          Comment

          • bimmer630
            E30 Fanatic
            • Mar 2009
            • 1228

            #6
            E36 M3 Uses the same spring diameter as E30 dude.


            They will fit your struts. I dont know how much Drop you will achieve, but I do know Ive used E30 springs on E36 M struts.
            The rear should work too

            Comment

            • Dj Buttchug
              R3V OG
              • Jun 2010
              • 7633

              #7
              Originally posted by bimmer630
              E36 M3 Uses the same spring diameter as E30 dude.


              They will fit your struts. I dont know how much Drop you will achieve, but I do know Ive used E30 springs on E36 M struts.
              The rear should work too
              this

              Turbo M42 Build Thread :Here
              Ig:ryno_pzk
              I like the tuna here.
              Originally posted by lambo
              Buttchug. The official poster child of r3v.

              Comment

              • mamzak
                E30 Modder
                • Mar 2010
                • 883

                #8
                Originally posted by bimmer630
                E36 M3 Uses the same spring diameter as E30 dude.


                They will fit your struts. I dont know how much Drop you will achieve, but I do know Ive used E30 springs on E36 M struts.
                The rear should work too
                Surprising! Lucky I left that 25% chance of me being wrong. :p
                Originally posted by Dozyproductions
                All girls fuck but not all girls fuck around with combustion engines.

                Comment

                • SedanElRey787
                  Member
                  • Apr 2011
                  • 45

                  #9
                  word because im use to civics!!! lol so they will wrk? thanks alot because they are H&R springs im getting for $60

                  Comment

                  • samiam3356
                    E30 Mastermind
                    • Jul 2009
                    • 1901

                    #10
                    hmmmmm I thought the e36 struts had springs that got smaller at the top. I know you can use e30 spriings in them for 5 swaps but your using an e30 strut mount when you do that which is what allows you to use them. I'm pretty sure e36 front springs are different than ours. But I'm leaving myself an out here and only going with "pretty" sure. haha :p

                    Originally posted by Roysneon
                    $5 shipped?
                    Originally posted by MarkD
                    You are a strange dude, I'n not answering any more posts from you.

                    Comment

                    • bimmer630
                      E30 Fanatic
                      • Mar 2009
                      • 1228

                      #11
                      The non-m springs start off big and get smaller at the top, but E30 and M3 springs stay the same diameter all the way up.

                      I put M3 springs in a stock set of e30 front struts once, With the E30 upper mounts etc. they're the same.


                      Isnt all this stuff widely known? Its talked about constantly on the 5 lug swap forum.

                      Comment

                      • SedanElRey787
                        Member
                        • Apr 2011
                        • 45

                        #12
                        Originally posted by Dj Buttchug
                        this

                        so you have e36 springs on urs???


                        i guess were im getting at is that the e36, 99 m3 spings will work on my e30???? lol sorry. new at the euro stuff

                        Comment

                        • iamsam
                          Advanced Member
                          • Jun 2008
                          • 172

                          #13
                          may not lower the E30 though, E36 springs are significantly taller and have a higher spring rate. I dunno, try it.

                          Comment

                          • bimmer630
                            E30 Fanatic
                            • Mar 2009
                            • 1228

                            #14
                            yeah I had them on there but now I have GC coil overs. I think creeping death is right, they are taller. I know they will fit i just dont know what your ride height will be

                            Comment

                            • SedanElRey787
                              Member
                              • Apr 2011
                              • 45

                              #15
                              Originally posted by iamcreepingdeath
                              may not lower the E30 though, E36 springs are significantly taller and have a higher spring rate. I dunno, try it.

                              well bro, there H&R lowering springs

                              Comment

                              Working...