Seafoam vs. Auto-Rx

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • TurboJake
    No R3VLimiter
    • Oct 2010
    • 3780

    #16
    1/3 of oil or seafoam to each part?
    IF 1/3 of seafoam to each part. No. I will never recommend seafoam dumped directly into the oil. I won't tell anyone NOT to do it, But I won't recommend it.

    But I will recommend 60% into the intake, 40% into the fuel. And whatever poison you choose for the oil, Be it ATF, Auto-RX, or your standard Pre-packaged kerosene "Motor Flush"
    And after waiting the however set amount of time after the seafoam has set, to go and beat the living piss out of your engine until it stops smoking (Under load, of course)


    Leave Me Transaction Feedback

    Comment

    • pandaboo911
      R3VLimited
      • May 2010
      • 2070

      #17
      Anyone used seafoam with a turbo motor? I'd like to do it, but thinking about it, all the carbon it loosens up winds up in the exhaust/turbo/wastegate.

      Comment

      • 5Toes
        Banned
        • May 2010
        • 9836

        #18
        So is the vacuum hose the one where this is?



        I am talking about the one that comes off the mount for the intake mani and goes towards front of engine into the smaller cylinder (what is that thing anyways)?

        Comment

        • Jand3rson
          Banned
          • Oct 2003
          • 37587

          #19
          Originally posted by drumad
          The guys over at bitog would push Auto-Rx over seafoam. Apparently seafoam = snake oil.
          Seafoam is bullshit. Run a can or 2 through your car, then pull your head. Doesn't do a damn thing to any of the carbon.

          Comment

          • Keith M
            R3VLimited
            • Nov 2006
            • 2338

            #20
            Andrew-the small cylinder is the fpr.

            Comment

            • mr.vang
              R3V Elite
              • May 2010
              • 4371

              #21
              i seafoam my e36 and drove down the road, out of no where an old lady riding a bike told us to pull over because it was smoking so much.
              Bought parts from me before? leave your feedback here

              Comment

              • TurboJake
                No R3VLimiter
                • Oct 2010
                • 3780

                #22
                Originally posted by Janderson
                Seafoam is bullshit. Run a can or 2 through your car, then pull your head. Doesn't do a damn thing to any of the carbon.
                I did this very thing with a KA24DE I have sitting on my engine stand before I yanked it from the car.. And what were once carbon covered pistons were clean enough for me write on with a crayon.

                Just go buy Deep creep, and spray it on some carbon deposits. It's the same stuff at a higher price and pressurized.

                THEN come back and say that ;)

                Or even better. Rip a head off with a nicely carboned engine. Spray some deep creep in there, let sit for 20 minutes. and torch it off, or hit it with some compressed air. Then start counting the black dots all over your face that were once inside the engine.


                Leave Me Transaction Feedback

                Comment

                • mr.vang
                  R3V Elite
                  • May 2010
                  • 4371

                  #23
                  seafoam is a great product. i have used it many times with great result. smoother idle
                  Bought parts from me before? leave your feedback here

                  Comment

                  • 5Toes
                    Banned
                    • May 2010
                    • 9836

                    #24
                    So the vacuum hose to the FPR is not the one to use, lol

                    Comment

                    • pureaudio
                      E30 Enthusiast
                      • May 2009
                      • 1123

                      #25
                      I'm not one for bullshit additives but on my 88 it had a really annoying stumble from idle that completely went away after seafoam. I wasn't even using it for that, my buddy and I just wanted to see how much smoke it would produce. Could be coincidence but for 6 bones, it was worth it.
                      sigpic

                      Comment

                      • pandaboo911
                        R3VLimited
                        • May 2010
                        • 2070

                        #26
                        Originally posted by 5Toes
                        So the vacuum hose to the FPR is not the one to use, lol
                        That's precisely the one to use.

                        Comment

                        • Vtec?lol
                          No R3VLimiter
                          • Dec 2009
                          • 3278

                          #27
                          Originally posted by Janderson
                          Seafoam is bullshit. Run a can or 2 through your car, then pull your head. Doesn't do a damn thing to any of the carbon.
                          Thank you.

                          It will clean your o2 sensor and cat, but other than that, it's poo.

                          If you have something wrong with your car, what makes you think pouring a can of anything will fix it?

                          Stuck injectors? take em out and clean em.
                          Miss? Go buy new spark plugs.

                          Seafoam does rid some issues but it's all temporary.

                          Comment

                          • SUICIDE109
                            Grease Monkey
                            • Jun 2010
                            • 326

                            #28
                            Sea foam, changing plugs and running just premium did it for me
                            Originally posted by devon.818
                            low key i actually paid attention to the drifting...then saw bouncing tits and went :o
                            Originally posted by devon.818
                            as for a 4hr boner...idk, start using it for things; cup holder, dial the phone, type with it, fix things, diagnose the e30, probe random shit...
                            Originally posted by Mercury[BKM]
                            ...because Machine Gun

                            Comment

                            • maddogg
                              Noobie
                              • May 2010
                              • 32

                              #29
                              Do Eeeeeettt!

                              Comment

                              • e30strokr
                                Wrencher
                                • Oct 2011
                                • 211

                                #30
                                just remember that seafoam will get into the oil when you do it thru the intake, so the oil could be thin when you are revving it....

                                Comment

                                Working...