hyundai elantra, trans mounting issues

[Kozworth]

My moms elantra had an issue where i had to replace the engine w/a junkyard one.

The engine cranksover freely with no trans. I used the trans from her old oneand the same torque converter. I removed and put the trans on multiple times, and it seems that the engine wont crank. The bell housing sits flush, but did crack a few times...


I am wondering if this trans is somehow still not mounted correctly? is there some computer restraint that does not allow it to turn?

The engine WILL NOT budge with a 1/2 drive wratchet in any gear on the trans..

Thanks in advance

[Dj Buttchug]

is the auto trans in gear? you need to make sure you have the shift linkage connected at the correct position.

[Kozworth]

Engine is out of car, if i select the gears manually on the trans no matter what I cannot get the crankshaft to move when the trans is mounted.. PRNDL all dont allow me to move the crankshaft via 1/2 drive wratchet.