NLA Parts

[BillBrasky]

51.48.1.979.952 M3 hood insulation

[TSI]

Right side late model foglight gasket. Left is still available.

[Rev Run D]

updated the list. Any more?

[SkiFree]

E30 M3 pressure plates are officially NLA. This was a really nice option on NA stroker engines and SpecE30's. Beware that most wharehouses are now superseding the number with the standard 325i pressure plate without any notice.

Part # 21212226505
(incorrect part that they are using now is #21211223026)

[ForcedFirebird]

E30 M3 pressure plates are officially NLA. This was a really nice option on NA stroker engines and SpecE30's. Beware that most wharehouses are now superseding the number with the standard 325i pressure plate without any notice.

Part # 21212226505
(incorrect part that they are using now is #21211223026)

Confirmed. Also as a caution, some parts warehouses are even using the BMW OEM part number with the wrong Sachs part number, when ordering by make/yr they are all 325 PP's.

[estoguy]

... ...I hate this thread.

What does it take to get so new OEM E30 floormats? Oh wait, they're NLFin'A!

Check this out: http://www.rtsauto.com/oem-fitting-r...s-from-an-e82/

[camshaftgsxr]

mats from the 1 series are insanly close to fitting perfect, i just put some rubber ones in my car tonight and they fit as good as my friends cloth mats do

[Mr. Tasty]

Mtech 2 kit besides the front bumper/valance

weird, I can pretty much order convertible specific stuff on ecs.

[BillBrasky]

07.11.9.915.160 M8 x 22mm Hex bolt with washer

These are the bolts that hold the exhaust shielding under the driveshaft and also for the center support brace.

[ForcedFirebird]

Wanted to order c101 pins today and can't find any. Even ECS shows discontinued, and the old part number doesn't work anywhere. I'm down to about 40-ish (~2 swaps).

Part # 61131376193, and 61131376191

[DrJosh]

Wanted to order c101 pins today and can't find any. Even ECS shows discontinued, and the old part number doesn't work anywhere. I'm down to about 40-ish (~2 swaps).

Part # 61131376193, and 61131376191

Looks like FCP might have them

[getouth]

Late model Driver side fender molding is NLA, Right side is still available......

[Vincent Brick]

The small plastic "bush" (51411911964) where the lock button goes through the door card is NLA. Was trying to get a couple this week, had to get used.

[ForcedFirebird]

Looks like FCP might have them

They don't mark items "NLA", they just refund your order monies with an apology after the fact. Maybe I will call on Monday.

[DrJosh]

They don't mark items "NLA", they just refund your order monies with an apology after the fact. Maybe I will call on Monday.

In my experience they have marked some things NLA or back-ordered without the ability to order it. They very well may not have them in this instance, but it never hurts to check.