Help me decide my next mod
Collapse
X
-
sigpic
1987 325e Lachssilber w/ MarkD chip and late bumpers, Zender EVO spoiler, s3.25 LSD
Originally posted by nandoI don't think there's really strong evidence that ZDDP harms cats. -
IMO, the faster racks are too twitchy if you are going to go poly everything and m3 control arm bushings. I have a z3 rack and everything mentioned above and let me tell you, you really have to pay attention while driving. It's fun, but a bit much for daily driving. I may end up putting back in my e30 rack.F80 M3 Alpine
E10 Fjord Blue 2002
E28 Blackish 535i
E21 Silver 320i
Disco1 98 4.6
~~~~~~
E30 Cirrus coupe S50 SOLD
E30 325i SOLD
E30 Alpine 325i vert Euro spec SOLD
E30 Alpine coupe 325is SOLD
sigpicComment
-
IMO, the faster racks are too twitchy if you are going to go poly everything and m3 control arm bushings. I have a z3 rack and everything mentioned above and let me tell you, you really have to pay attention while driving. It's fun, but a bit much for daily driving. I may end up putting back in my e30 rack.Last edited by CarsonE30; 03-28-2016, 05:47 PM.C6Z
S2K
VeloNComment
-
Have you done offset M3 control arm bushings? This seems to be the best combo on the stock rack. It completely changes the caster and makes it super nice. It's a quick and easy fix. But new rack is nice too! I wouldn't get rid of the e30 unless the rack was going bad. But I'd say the e36 rack is a good compromise. The z3 rack is simply nutz! Unless you're going for nutz, than its awesome!F80 M3 Alpine
E10 Fjord Blue 2002
E28 Blackish 535i
E21 Silver 320i
Disco1 98 4.6
~~~~~~
E30 Cirrus coupe S50 SOLD
E30 325i SOLD
E30 Alpine 325i vert Euro spec SOLD
E30 Alpine coupe 325is SOLD
sigpicComment
-
Have you done offset M3 control arm bushings? This seems to be the best combo on the stock rack. It completely changes the caster and makes it super nice. It's a quick and easy fix. But new rack is nice too! I wouldn't get rid of the e30 unless the rack was going bad. But I'd say the e36 rack is a good compromise. The z3 rack is simply nutz! Unless you're going for nutz, than its awesome!
Sent from my SM-G900V using TapatalkC6Z
S2K
VeloNComment
-
moar stickerz!
seriously tho, matching front and rear bumpers.
Is that rust or just dirt behind the sideskirts? I can't really tell. If rust, I'd get that addressed asapIf it's got tits or tires, it's gonna cost ya!Comment
-
Not sure what you're talking about behind the side skirts. There isn't any rust. The car is a little dusty in the pics from a 3 hour highway drive.
As for the bumpers, I actually wanted to piece together a Frankenstein of all my favourite bits. Always loved the cow catcher is bumper. Threw a Ryan g splitter on it and tucked the bumper. Always liked the mtech 2 rear bumper the best. Hate the mtech 2 spoiler so I went with mtech 1, and so on. I know it doesn't match, but it ends up looking different and I like it. And it certainly doesn't impact on direction I'm hoping to take this car.
This car will never be "perfect". It's a driver. My plan is to make it as nimble as possible over time. At some point it may become a dedicated auto cross car or I may enter it in Targa.
I get the impression you were trying to make fun of the car or me from your response to my question about mods. I happen to think there has been some great suggestion/discussion thus far from other members and I appreciate it.1976 2002, 1987 325is, s50 1991 touring, 1996 328i vert
Comment
-
IMO, the faster racks are too twitchy if you are going to go poly everything and m3 control arm bushings. I have a z3 rack and everything mentioned above and let me tell you, you really have to pay attention while driving. It's fun, but a bit much for daily driving. I may end up putting back in my e30 rack.88 325is Five SpeedLachssilberComment
-
+1 to steering rack, definitely makes the car feel a little tighter/more modern(but in a good way). I opted to shorten my steering knuckle using a 1/8" thick steel guibo (Instead of removing the collapsing pins for spacers), and the steering feels so much more connected just from removing that rubber. With solid engine mounts I get some vibration through the wheel while stopped/at idle, but the car isn't comfortable to begin with.
M3 offset cabs or poly equivalents, THR eyeballs or BW/ebay versions all make a big difference, just depends on what you want to spend for two bushings and how harsh a ride you're going for.Originally posted by priapismMy girl don't know shit, but she bakes a mean cupcake.Originally posted by shamesonUsually it's best not to know how much money you have into your e30Comment
Comment