Labor Cost of Replacing Heater Blower Motor and Resistor
Collapse
X
-
Those complaining about replacing the blower motor on an e30, clearly have never attempted to replace a blower motor on a Volvo 240 series.
-
I just had mine replaced by the shop last year. The heater core valve was ~$350? I thought I was getting ripped off so I called a few places and it was about that price. The labor was about 5 hours or so. The car was already in the shop doing the final check with my 24v swap when that occurred...it sucked.Leave a comment:
-
Eh, I think that's a bit presumptuous to be completely honest. It may very well NOT be worth his time to do it himself. What if OP has a wife and kids he loves to spend time with when not at his job and due to other obligations simply doesn't have time to mess around with something he may or may not know tons of things about. What if he simply isn't a person who is good with their hands has mechanical aptitude?
Experience is what makes the job easy, not the job itself. Not having a feel for mechanical things is what ends up complicating easy jobs. Things you and I wouldn't think twice about could possibly throw and inexperienced person for a loop they simply aren't willing to deal with. Think about the headache the first time you cross thread a bolt. I'm sure we could find an example in another industry that you and I are not familiar with that is considered "easy" that would not be a walk in the park having no background in that field.
Just putting that out there. It's 100% worth it for many people to pay others to work on their cars. That is why there are so many shops out there!Leave a comment:
-
Leave a comment:
-
OP, if you have an m20 car, it's worth your time doing it yourself. I've taken mine in and out multiple times now (first with another used one, then with a brand new motor, then I had to take it out to replace the wipers), and it's always been way cold outside when I happened to be in there. It's not hard at all, just involves some thinking and patience, mainly when navigating the motor past the intake manifold. Also, the metal clip that holds the motor itself doesn't like to go in unless you get it perfect, so pay attention to how it comes out. Should take you an hour and a half top if it's your first time.
One time I had a shop replace a freeze plug on my '89 Toyota pickup with the V6, which they said they couldn't get to without taking one of the heads off. I wasn't mechanically inclined at the time and my dad offered to help pay for it, so what was supposed to be $300 naturally became head gaskets, entire new cooling system, timing belt etc etc. It took a week and a half for the shop to do. A few days after I got the car back it was leaking coolant again so I had it towed back to the shop. It was a slow leak not coming from the rad or t-stat housing or any of the hoses. After they'd had a bit to look at it they deemed that one of the freeze plugs hadn't been installed correctly.
How much of their shit was BS, I don't know - I'm guessing quite a bit. But it was satisfying knowing they'd have to do the entire job over again because it was under shop warranty, which would not have applied had I been hunting around for parts trying to save $20 here and there.Leave a comment:
-
-
-
According to repair shop data, the m42 and m20 cars show .9 hours to install a blower motor. If they charge you other than what everyone else in the country is looking at (shop software), they are over-charging.
Side note: My shop allows customers to bring parts, but as mentioned above, no warranty. Had a good example of this once. Porsche Cayanne starter. Customer balked at the price of an OE starter, provided his own knowing there was no warranty. Well, only two weeks later we had to do the job again. Not a big deal on most cars, but that particular engine is direct injection with the starter under the intake manifold (V8). At the time the car was still fairly new and starters were in the $600 range, he purchased online for $300-something, but it was the 7hr install time that hurt (twice).Leave a comment:
-
-
It's definitely not for everyone. However, if you specialize in one or two things and get really good at them, it's a good thing for everyone. Nothing is perfect, but the reward outweighs the risk, IMHO.Leave a comment:
-
Sometimes i think id like to work on cars for a living. Then I read threads on this. I think ill just stick to it as a hobby with the only stakeholder being myself.Leave a comment:
-
10/10 agreed...Through my experience, it will one day end up a bad experience for both parties. Once I did a clutch on a car and the clutch kit he gave me ended up being shit. I ended up taking the tranny out 3 times. I did that to ensure I installed it correctly before I called the customer telling him he gave me a bad part and I need to charge him XXXX dollars again to install the right one. He ended up saving a few bucks on the kit, but at the end of the job he paid labor twice, which ended up being hundreds more than if he would have ordered the right parts through me to begin with. After that experience, I only install customer supplied parts if they're genuine.Leave a comment:
-
Through my experience, it will one day end up a bad experience for both parties. Once I did a clutch on a car and the clutch kit he gave me ended up being shit. I ended up taking the tranny out 3 times. I did that to ensure I installed it correctly before I called the customer telling him he gave me a bad part and I need to charge him XXXX dollars again to install the right one. He ended up saving a few bucks on the kit, but at the end of the job he paid labor twice, which ended up being hundreds more than if he would have ordered the right parts through me to begin with. After that experience, I only install customer supplied parts if they're genuine.Leave a comment:
-
I trust my shops and they trust me. We both understand that there is no warranty on repairs when I supply the parts. If I did not trust them enough for that arrangement, I would find another shop. They also know I'm a BMW enthusiast (with 3 old Bimmers) and not a douche that would unfairly rip them online when a part I supply fails. They value my long-term business over a markup on a part. Maybe a certain type of shop attracts a certain type of customer, or maybe it's a Southern thing.Say you think your starter is bad:
Did the shop diagnose the starter as the problem, or did you bring them a part and ask them to put it on the car? What happens you just asked them to put the part on and it didn't fix anything? What happens if your OE starter fails after a month? Obviously your warranty covers the part, but who covers the labor of putting in another starter? Do you have to buy a second starter so the shop can just remove and replace, or does your car take up space on their lot/lift while you wait for a new starter?
When a mechanic diagnoses an issue, supplies the part, and installs the part, all the responsibility is on the shop. As a shop, I wouldn't want to warranty any customer supplied part or the labor to install it. Also as a shop, I wouldn't want to lose profit to an online retailer.
So personally, I would be nervous about a shop that gives up profit and assuming the labor cost if a part fails.
CoryLeave a comment:

Has anyone seen OP lately?
Leave a comment: