Probably going to pay about 2 hours.
They might up their labor a little, since you're bringing the parts and that is a profit loss for them.
I hate when customers bring me parts :p
Like said above, it is worth it to have them do everything. If it shits, they warranty parts and labor.
Labor Cost of Replacing Heater Blower Motor and Resistor
Collapse
X
-
This. All this. Having done this a while, I really don't like using customer supplied parts, but if they want to be a cheap ass and install their parts they "got for super super super cheap on that new FCP EURO site", I will, in rare, certain situations and do not want to hear fuck-all when said POS Chinese part fails.Say you think your starter is bad:
Did the shop diagnose the starter as the problem, or did you bring them a part and ask them to put it on the car? What happens you just asked them to put the part on and it didn't fix anything? What happens if your OE starter fails after a month? Obviously your warranty covers the part, but who covers the labor of putting in another starter? Do you have to buy a second starter so the shop can just remove and replace, or does your car take up space on their lot/lift while you wait for a new starter?
When a mechanic diagnoses an issue, supplies the part, and installs the part, all the responsibility is on the shop. As a shop, I wouldn't want to warranty any customer supplied part or the labor to install it. Also as a shop, I wouldn't want to lose profit to an online retailer.
So personally, I would be nervous about a shop that gives up profit and assuming the labor cost if a part fails.
That being said, the job isn't bad if you have an M10 or M20 powered car. Any of the twin-cam (S14, M42, 24v, etc) engines are more annoying to work with, but it is most certainly doable. Expect to pay two hours shop time if you take it somewhere. Possibly more, depending on which car you have. The last 318is I changed one on took me about an hour all said and done. That annoying ass wiring harness cover gets right in the way.Leave a comment:
-
It waffled out the name of a female deer? That's weird.
Jane waffleswaffleswaffles
John waffleswaffleswaffles
Dough?Leave a comment:
-
As long as you are OK with that, and it's all in writing, most shops would be fairly fine with that. Obviously, many of us have different relationships with shops being enthusiast. But Jane waffleswaffleswaffles with her BMW mini that blew up a motor (again) probably isn't going to be showing up with a good pull she sourced from somewhere and expecting a full shop warranty.Leave a comment:
-
The shop I use will let me supply a part based on an agreed and thought out diagnosis. BUT, they clearly say every time that they will not warranty any of it.Say you think your starter is bad:
Did the shop diagnose the starter as the problem, or did you bring them a part and ask them to put it on the car? What happens you just asked them to put the part on and it didn't fix anything? What happens if your OE starter fails after a month? Obviously your warranty covers the part, but who covers the labor of putting in another starter? Do you have to buy a second starter so the shop can just remove and replace, or does your car take up space on their lot/lift while you wait for a new starter?
When a mechanic diagnoses an issue, supplies the part, and installs the part, all the responsibility is on the shop. As a shop, I wouldn't want to warranty any customer supplied part or the labor to install it. Also as a shop, I wouldn't want to lose profit to an online retailer.
So personally, I would be nervous about a shop that gives up profit and assuming the labor cost if a part fails.
Can't confirm, but suspect that they only do this for very select customers that they know have extensive knowledge and ability. The only thing I ever really go to them for is for things that either require tools that I do not have or for work that I'd rather pay somebody else to do.Leave a comment:
-
Say you think your starter is bad:
Did the shop diagnose the starter as the problem, or did you bring them a part and ask them to put it on the car? What happens you just asked them to put the part on and it didn't fix anything? What happens if your OE starter fails after a month? Obviously your warranty covers the part, but who covers the labor of putting in another starter? Do you have to buy a second starter so the shop can just remove and replace, or does your car take up space on their lot/lift while you wait for a new starter?
When a mechanic diagnoses an issue, supplies the part, and installs the part, all the responsibility is on the shop. As a shop, I wouldn't want to warranty any customer supplied part or the labor to install it. Also as a shop, I wouldn't want to lose profit to an online retailer.
So personally, I would be nervous about a shop that gives up profit and assuming the labor cost if a part fails.Leave a comment:
-
Every reputable independent BMW shop I've used would let me supply parts. My parts are always OE, OEM, or OEM equivalent. Not sure if that makes a difference, or how they would respond if I showed up with parts from AutoZone.
CoryLeave a comment:
-
I would expect you to be charged at least an hour, probably 2 hours, at your local labor rate. For an e30 with an m20, it should only take them 45 min to complete the job.
As a side note, I would never install customer provided parts. After having been a mechanic, I would also be very nervous taking my car to a shop that allows me to supply parts.Leave a comment:
-
I just changed the resistor and blower motor on my vert. Not hard at all. Don't know why people bitch about it. My only problem was the clip didn't want to snap back in once all together.Leave a comment:
-
Not that many but never had one fight me so maybe I'm lucky. A couple of the access cover screws can be a bit of a pain to get to but overall a pretty easy job.
There are DIY videos on youtube for those that want to try it themselves.Leave a comment:
-
you must install a lot of blower motors and its been a breeze every timeLeave a comment:
-
Leave a comment:
-
-
4 bolts for the access cover in the engine bay and a spring clip holds the blower motor in the housing.
It's not like a lot of cars where you have to remove half the dash.Leave a comment:

Leave a comment: