Announcement

Collapse
No announcement yet.

The R3VLimited rare parts thread

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Originally posted by CorvallisBMW View Post
    Exactly. AFR, volts, temps.... the possibilities are endless. And with there being only 4 switch blanks that qualify as "OEM locations", that really limits how many readouts you can have. Something like this would add a ton of real estate!
    This would keep you from having to sacrifice a vent for something like the Podi gauge too.

    Comment


      Yes but there are already factory read-outs in that location. A full one shows

      Seatbelt
      SRS
      O2 sensor
      Overheat
      Drive it hard. Maintain it well.


      Convertible Technical & Discussion
      A Topless Memorandum

      Comment


        I don't think any E30 came with all of them though. For example, "O2 sensor" was replaced by the check engine light in the cluster by the time airbags came around.

        Comment


          Steering this thread in the wrong direction...
          ACS S3 Build / Dinan 5 E34

          Comment


            Oh and ill just leave this here..
            [/quote]
            That great you found Alpina wheels 16x8!!!
            Projects Hartge,Alpina & AC Schnitzer Builds.http://www.r3vlimited.com/board/showthread.php?t=280601
            http://www.r3vlimited.com/board/showthread.php?t=227993
            http://www.r3vlimited.com/board/showthread.php?t=289362

            DSC04926 by Raul Salinas, on FlickrDSC03413 by Raul Salinas, on Flickr

            Comment


              Kamei front for the 2002 touring.
              #ShenanigansE30 1989 Touring AC Schnitzer S3 replica http://www.r3vlimited.com/board/showthread.php?t=320784
              Ruffian 1987 318is 2 door Hartge project http://www.r3vlimited.com/board/showthread.php?t=290863
              Natalma 1990 Touring AC Schnitzer S3
              #GlorianaE28 1986 525i
              #AnniePowerE34 525i 3.2 M50 with AC Schnitzer S5 parts
              sigpic

              Comment


                ^ I swear you find all the coolest stuff over there


                1989 325is l 1984 euro 320i l 1970 2002 Racecar
                1991 318i 4dr slick top


                Euro spec 320i/Alpina B6 3.5 project(the never ending saga)
                Vintage race car revival (2002 content)
                Mtech 2 turbo restoration
                Brilliantrot slick top "build"

                Comment


                  It is still available yes, but not for long, I'm grabing as much as I can, before it's to late.
                  Going to pick up a set of AC Schnitzer 4x100 16x7.5 wheels today for my White touring.
                  and I'm buying a Hartge E28 spoiler from a really good friend.
                  #ShenanigansE30 1989 Touring AC Schnitzer S3 replica http://www.r3vlimited.com/board/showthread.php?t=320784
                  Ruffian 1987 318is 2 door Hartge project http://www.r3vlimited.com/board/showthread.php?t=290863
                  Natalma 1990 Touring AC Schnitzer S3
                  #GlorianaE28 1986 525i
                  #AnniePowerE34 525i 3.2 M50 with AC Schnitzer S5 parts
                  sigpic

                  Comment


                    There's the Wheels, safe and sound in my basement.

                    Now I just need to pick the right color for them, thinking of gold and copper colors for the centers and a polished lip.
                    #ShenanigansE30 1989 Touring AC Schnitzer S3 replica http://www.r3vlimited.com/board/showthread.php?t=320784
                    Ruffian 1987 318is 2 door Hartge project http://www.r3vlimited.com/board/showthread.php?t=290863
                    Natalma 1990 Touring AC Schnitzer S3
                    #GlorianaE28 1986 525i
                    #AnniePowerE34 525i 3.2 M50 with AC Schnitzer S5 parts
                    sigpic

                    Comment


                      Hi
                      I am looking for the last wheel. I got 3 of these And need the last one.

                      Thxs

                      T



                      Hartge oz 4x100 16 inch , not 17


                      Sent from my iPhone using Tapatalk

                      Comment


                        I recently got my hands on an Italvolanti as well! Brand new wheel never used, the only downside is that it requires a 3 hole hubs which is proving to be difficult to find....

                        Untitled by Greg-Kline, on Flickr

                        Comment


                          Hmmm, thought I'd posted in here, but I guess not.


                          My Recaros


                          Zender Evo Spoiler w/ Gurney flap


                          While I was restoring it


                          Italvolanti Formel


                          CSIs 3-piece wheels in 4x100 fitment - only set I've ever found. This is mid-refurbishing.





                          Momo 'Mario Andretti' signature wheel
                          Last edited by kingston; 12-06-2014, 11:12 PM.
                          Originally posted by LJ851
                          kingston is the play by play announcer for this thread.
                          ‘Tis by the grace of God that my cars run!

                          Originally posted by unloadedak
                          #teamross
                          Siobhan's Build Thread - UPDATED!

                          Comment


                            Originally posted by K-Line View Post
                            I recently got my hands on an Italvolanti as well! Brand new wheel never used, the only downside is that it requires a 3 hole hubs which is proving to be difficult to find....
                            Wow brand new! Amazing find.

                            Exactly the issue I have. I was thinking to drill and tap 3 holes in a momo/universal hub. But they only have like 80-83mm diameter face which isn't enough for italvolantis large bolt pattern.

                            I've also been looking at buying a steering wheel spacer or quick release and drilling that but same problem nothing bigger than like 80mm diameter..

                            Looking more and more like custom is the only way. I could easily make something if I only had a lathe! :(

                            Last thing I want to do is drill a six bolt pattern into the wheel.. Any thoughts?
                            Last edited by JamesE30; 12-07-2014, 02:23 AM.

                            R.H.D
                            M-technic I club

                            Comment


                              Is it made for the aiwe hub that other ACS wheels use?
                              ACS S3 Build / Dinan 5 E34

                              Comment


                                Originally posted by TimeMachinE30 View Post
                                Is it made for the aiwe hub that other ACS wheels use?
                                It does fit the aiwe hub, but finding one isnt very easy... ive been looking

                                Comment

                                Working...
                                X