Can someone help me? I pulled a mtor out of a 95 ti that had a 6cyl swap in it. Wanted to know if I could check the serial numbers some where to see what engine it is. Thanks.
Announcement
Collapse
No announcement yet.
what motor do I have
Collapse
X
-
Are you sure about what you're saying? I don't think they had a 6 cylinder in 1995?
* 1994-1998, 316i: 1596 cc, I4, 8 valves, 75 kW (102 PS/101 hp), 150 N·m (110 lb·ft)
* 1999-2001, 316i: 1895 cc, I4, 8 valves, 77 kW (105 PS/103 hp), 165 N·m (122 lb·ft)
* 1995-2000, 316g: 1596 cc, I4 petrol/biogas, 8 valves, 75 kW (102 PS/101 hp), 150 N·m (110 lb·ft)
* 1994-1995, 318ti: 1796 cc, I4, 16 valves, 103 kW (140 PS/138 hp), 175 N·m (129 lb·ft)
* 1995-1999, 318tds: 1665 cc, I4 diesel, 8 valves, 66 kW (90 PS/89 hp), 190 N·m (140 lb·ft)
* 1996-1999, 318ti: 1896 cc, I4, 16 valves, 103 kW (140 PS/138 hp), 180 N·m (130 lb·ft)
* 1998-2001, 323ti: 2494 cc, I6, 24 valves, 125 kW (170 PS/168 hp), 245 N·m (181 lb·ft)Last edited by Nicademus; 10-25-2008, 06:54 PM.
-
Originally posted by logger View PostNo I am sure that they did not. This motor was swaped in.
Comment
-
Originally posted by TDE30 View PostThere were E36 Compact's in Europe with the M50, they were referred to as the 323ti (produced from 1/97 to 8/00.) However, the pictured motor looks very much like an M52 (judging by the intake manifold.)
You might be lucky and get the info off of the white sticker that's on the back of the head or block, just above the flywheel. It's a white plastic sticker that has a bunch of info on it, and somewhere on there MAY be the engine code or the VIN code that will tell you what engine it is. Either take a good pic of that sticker + post it up or post up what's on the sticker and we'll figure it out for you.... ;)
Bret
Comment
-
Originally posted by TDE30 View PostThere were E36 Compact's in Europe with the M50, they were referred to as the 323ti (produced from 1/97 to 8/00.) However, the pictured motor looks very much like an M52 (judging by the intake manifold.)
Comment
Comment