If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
if it is anything like the E30, you can just tighten the nut down more to press it onto the splines. That's what I did with mine, and they are working great now.
if it is anything like the E30, you can just tighten the nut down more to press it onto the splines. That's what I did with mine, and they are working great now.
That was exactly the problem, I don't know why I didn't check that first. How often the simple solution will elude us.
I lifted the little covers over the splines, and both nuts were spun almost completely off of the splines. Tightened them back down, and disco!
Comment