If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
measure how far you want your wheels to come out with a tape measure. I measured from the wheel to the fender when i had nonstock wheels on mine. its usually pretty accurate. 20mm = 20mm spacer. pretty simple
Ok...I have the mesurments I just want to know if this will be ok having two different size wheel spacers. I don't mean to have an attitude or be a douchebag but when someone comes at me with an off the wall, ass hole response like that it kind of pisses me off.
Wonderful attitude from the douchebag asking one of the most vague questions possible.
Technically he gave you all the information you needed for the question. He stated the depths he wanted to bring the wheels to and the types of hardware possibly involved. What more do you need and why is that vague?
turnermotorsports.com has the spacers and longer bolts for the front. The 25mm H&R spacers don't need them as you bolt the spaver to the hub then bolt the wheel to the spacer with the stock bolts.
Need parts now? Need them cheap? steve@blunttech.com Chief Sales Officer, Midwest Division—Blunt Tech Industries
Comment