If you're shooting for 450hp and you have the money (which it looks like you do) just ditch the M20 right now and don't bother putting any work into it. S50/52 swap, turbo/supercharger, and a nice tune should get you there, but at no cheap cost.
New here to R3VL
Collapse
X
-
-
When are all these Euro and Pavillions meets AZ guys? They never post them on AZBMW.
Good luck with your E30 BTW. I just went through the whole 24V process, so if you ever have any questions about what needs to be swapped and all that, don't hesitate to contact!
Wade
Comment
-
-
:) Welcome, lots of great "Search" info on here!. I have a similar battle with my very own ThreeTweentyFissel...
Simplicity is your best option!Comment
-
I'm going to agree, other than the bottom end nothing on the eta motor is a good base to start with. the engine harness is useless for PnP standalone engine management, all of the intake side of the motor is garbage, the head is worth more as scrap... you could probably cobble something together but it will be a bigger headache than a straight swap.Comment
-
With the condition of the current engine and your budget ideas I think a boosted M50 sounds like a good plan for you.1990 Islandgrun 535iM Sedan
Euro lights + trim | Eibach/Bilstein | BBS RC090 17x8 | EAT Chip | Port + Polish | IE 284 Cam | Built valvetrain

Comment
-
The wheels are Exel TZ-10's in 18X7.5 et42
I have been searching my ass off on here since I am an E30 newb but not a newb to BMW's, VW's, Mini's and Fords. But thank you for the advice. I am on 26 car forums at the moment and it is an up road battle.
I will see what I can do....lol.:DComment
-
Ok....so I got the hook up from my new friend Mike. This is what I got for 700 bucks...


and I believe its S50 goodness! So if anyone can point me in the right direction for a list of parts it would be appreciated. Plus, Im gonna pull the PS rack.....:D Its a 95 325i swapped already. Just doesnt have a trans.....boooooo
Last edited by FREE30; 10-25-2009, 05:39 PM.Comment
-
If you need some help with it let me know.Comment
-
Looks like a non vanos m50 with wrong cover to meMtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205
OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827Comment
-
Comment
-
Yeah it is lol.
Pull motor and get rid of the e36 then start the swap into the e30.Comment
-



Comment