Finally finished my Harness bar and seat bracket instal. Thanks to Ken for helpin me out again. This project was a bit of a PITA, but in the end it's worth it.
Everything out:
![](http://i4.photobucket.com/albums/y137/UofOm3/Picture004.jpg)
bar partially in
![](http://i4.photobucket.com/albums/y137/UofOm3/Picture006.jpg)
cleaned with stuff out
![](http://www.s14.net/photopost/data/500/17Picture_011.jpg)
Bar installed
![](http://www.s14.net/photopost/data/500/17Picture_012.jpg)
finished product
![](http://www.s14.net/photopost/data/500/17Picture_017.jpg)
It makes a lot of difference, hopefully it'll help at the auto-x this weekend. Finally a shot of Ken's weaves - how f'in clean are they
Everything out:
![](http://i4.photobucket.com/albums/y137/UofOm3/Picture004.jpg)
bar partially in
![](http://i4.photobucket.com/albums/y137/UofOm3/Picture006.jpg)
cleaned with stuff out
![](http://www.s14.net/photopost/data/500/17Picture_011.jpg)
Bar installed
![](http://www.s14.net/photopost/data/500/17Picture_012.jpg)
finished product
![](http://www.s14.net/photopost/data/500/17Picture_017.jpg)
It makes a lot of difference, hopefully it'll help at the auto-x this weekend. Finally a shot of Ken's weaves - how f'in clean are they
![](http://i4.photobucket.com/albums/y137/UofOm3/Picture025.jpg)
Comment