Pictures and videos: Rebuilt M20

[nando]

not that I know of.. you can get billets but they cost a fortune.

[MR 325]

you need them with regrinds because they have to cut down the base circle.

That's just not true. I have personally run 2 cars with regrinds and stock eccentrics. A friend has also run 2 cars with reground cams and stock eccentrics.

[MR 325]

damn, looks like the HD rockers are on back order right now. does anyone else offer an HD rocker?

Nobody else makes anything in that price range. My buddy just went and picked up a set a few days ago. I know Jeremy said the M10/M30 ones were out of stock but they should have M20. Give them a call.

[nando]

That's just not true. I have personally run 2 cars with regrinds and stock eccentrics. A friend has also run 2 cars with reground cams and stock eccentrics.

I had an m20 regrind that you couldnt have possibly set valve lash without oversized eccentrics.

[Suspence]

I only used 1 oversized eccentrics for some reason? The rest were just fine, I'm selling the rest that I have if anyone is interested.

[A Sucked Orange]

Thank you for painting your engine a proper color.

What sort of mileage are you getting?

[schtozo]

nice fart maker, :P

[Paukert11]

clean......

[88SuperETABD]

man, i need a millermaf/war chip. my car idles at 1000 with my alpina chip. Exhaust really brings out the cam, people used to ask me if i had a v8. I'm back to stock exhaust and my car doesn't sound as lopey.

[Suspence]

Thanks! Prob 15-20MPG. Maybe a little more depending on how I drive. :)

Next is LSD I can NOT WAIT AHH!

[LJ851]

Since when is a 272 regrind a huge cam? Another thing to consider about a regrind cam is that it makes the already unfavorable rocker ratio/lift curve even worse. They are cheaper,though. Engine looks good and sounds nice!

[kingston]

Suspence,

I've watched the evolution of your car with much interest. Early on I didn't know hw things were going to turn out, but you've certainly done things properly, especially given your budget constraints mentioned in another thread.

Cliff's notes: WELL DONE!!

[ian e30 318is]

You did the work at Marco Polo? I recognize that alley haha. Sounds and looks awesome so far! Keep it up

[craz azn]

Interesting... you sure it is a 272? Sounds waaaay wilder than that... even a 284/272 doesn't idle that lumpy.

[dude8383]

not that I know of.. you can get billets but they cost a fortune.

i intend to purchase the billet one...its $350, not tooooo bad. Considering that 24v cams are usually more than double that.