Announcement

Collapse
No announcement yet.

Euro mt1 m21d24. Turboing it atm.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    Turboz timez. Started working today after lunch

    bye bye NA m21d24.


    Removed both manifolds (exhaust manifold was a PITA)
    Painted my new intake mani
    Took off the oil pan to make an oil drain pipe for turbo
    Took off the oil filter and drilled it to make an oil feed.
    Removed the exhaust





    oh and i've got this huge ass intercooler from a e28, still trying to figure out if i'll be able to squeze it in e30.

    Comment


      #32
      You're turboing the M21? Nice.

      Your passenger seat is a Recaro LS-C, your driver's seat is some sort of different Recaro LS.

      also please change that steering wheel
      cars beep boop

      Comment


        #33
        Originally posted by kronus View Post
        You're turboing the M21? Nice.
        yup. Using a large turbo from e28 (e30s came with a lot smaller ones), raising the boost up to 20 psi, adjusting the fuel, putting on the intercooler and doing some other stuff to the fuel pump. Should be at around ~180hp.

        Originally posted by kronus View Post
        Your passenger seat is a Recaro LS-C, your driver's seat is some sort of different Recaro LS.

        also please change that steering wheel
        already did that. And a bit more. There's a thread about the touring here http://www.r3vlimited.com/board/showthread.php?t=249308

        Comment


          #34
          M-Tech 1? More like M-Tech .25

          jkjk good luck with turbo
          E30 buildy things
          http://www.r3vlimited.com/board/showthread.php?t=195286

          Comment


            #35
            The whole 20psi and 180hp concept makes me scratch my head. I understand whats going on, and why, it just sounds so funny.

            Comment


              #36
              Originally posted by MattAvino View Post
              M-Tech 1? More like M-Tech .25

              jkjk good luck with turbo
              uhm. why? i'm missing the rear bumper right now, everything else is there, even the steering wheel/gear knob:}


              Originally posted by Farbin Kaiber View Post
              The whole 20psi and 180hp concept makes me scratch my head. I understand whats going on, and why, it just sounds so funny.
              lol, yeah, diesels. But the torque figures will be impressive. Good thing it doesn't need any internal work done to it to hold that kind of boost.
              honestly i'll be glad if i'm able to smoke m50's and still be able to get great mpg's/run on used veggie oil

              Comment


                #37
                looks tough, i like it. I would probably touch up with aerosol paint where theres chips and things but its being picky i guess!

                Comment


                  #38
                  Had some time to work on the car today.

                  Painted the valve cover too


                  Mounted the exhaust manifold/turbo


                  Made some flanges for oil, tapped the oil filter for feed


                  Mounted the intercooler/connected all the piping. Had to do a bit of cutting up on the rad support, but i'm really happy with how it worked out.


                  Adjusted the fuel pump a bit. Turbo pumps have a thing called LDA, which is activated once the boost comes up. It pushed the diaphragm/fueling pin down, thus adding more fuel. My NA pump needed some modifications for LDA to function. Swapped the breather valve from the top of the diaphragm to the bottom, and drilled/tapped a hole for a valve, which is then connected to the intake manifold.




                  and last but not least. Decided to paint the valence since it's already off. Cut the vents out too to allow more air circulating through the intercooler/rad.



                  Things left to do:
                  connect the downpipe, weld in straight 2,5 or 3,0 exhaust
                  put on my remus mufler
                  connect the boost gauge
                  tune the fuel pump/boost pressure
                  finish painting the valence




                  p.s sorry for the cell pics, my camera decided to go all fogy

                  Comment


                    #39
                    Is that a home made strut brace?
                    ส็็็็็็็็็็็็็็็็็็็็็็็็็
                    Originally posted by blunttech
                    I need you to exfoliate my ballsack
                    Build Thread?



                    Comment


                      #40
                      Because, science!

                      Comment


                        #41
                        Forgot about this thread while enjoying the summer.

                        Went out to this baltic traditions oriented metal fest with friends and decided to rust out my hood for fun. With some columns of gediminas painted on ( http://en.wikipedia.org/wiki/Columns_of_Gediminas for those interested in symbolism of this)



                        The car was kind of a star of the parking lot. lol. A couple of shots i found on the net


                        Comment


                          #42
                          CONFIRMED SCAMMER Antonis Palekis.

                          Comment


                            #43
                            lose rear spoiler, everything else looks very good.

                            Comment


                              #44
                              Originally posted by VDub2625 View Post
                              hell yahhh.... hate when trashes like him are spoiling my country's name:curse:

                              Comment


                                #45
                                Originally posted by mt1addict View Post
                                Pfeba or Mt1 rear spoiler?










                                oh it is. It's my daily:}



                                ooo, malonu matyt žmones nepamirštančius kalbos gimtos. Labas:)
                                Ačiū. Nors čia tik paaati pradžia, tiesą sakant
                                QUE SEXY man :grin::grin::grin::grin::grin::grin:


                                91' Alpine II 318is Slick top - Totaled
                                89' Lachssilber 325is - :p

                                Comment

                                Working...
                                X