A Non-Intersting College Budget '91 Calypso Coupe

[Zreberlcoe]

In those pictures? I'm not sure. But my current wheels are ESM 002r's. Anyone else have input?

[mlbryant8]

Follow this, OP:

What wheels are those? I saw esm 002r in your post but when I looked them up, showed a different wheel.

[325i]

I have to make the drive home this weekend and it's about a 240 mile drive, anyone have an idea on how I can do a quicky on correcting my camber? My tires are getting destroyed on the inside edge and I want to get the tread as flat as possible for the drive. Should I just eye ball it or what? I have the Megan Racing camber plates and there are little notches that help with evening out the sides and I have IE adjustable plates in the rear.

photo shoot! me and chris are both getting new wheels on this weekend end. (mine may not happen till sunday though..)

[Zreberlcoe]

I have to make the drive home this weekend and it's about a 240 mile drive, anyone have an idea on how I can do a quicky on correcting my camber? My tires are getting destroyed on the inside edge and I want to get the tread as flat as possible for the drive. Should I just eye ball it or what? I have the Megan Racing camber plates and there are little notches that help with evening out the sides and I have IE adjustable plates in the rear.

[jeenyus]

Cool, did you use anything to clean them up first? cause I have a white scuff on one and Idk if it'll come off..

I did use some prep-all and then a light coat if adhesion promoter I had. I paint a lot of stuff so I had most of this laying around. It really is simple though and makes a big visual difference.

If you go to an auto paint store I know they will set you right if they know anything.

[Zreberlcoe]

The red translucent paint was 17.50 for the can. 2k clear was pretty close to 20 for the can.

Cool, did you use anything to clean them up first? cause I have a white scuff on one and Idk if it'll come off..

[jeenyus]

Do you know the about cost?

The red translucent paint was 17.50 for the can. 2k clear was pretty close to 20 for the can.

[Zreberlcoe]

Looking good! I have to comment every time I see Calypso, it's just THAT good of a color. Bucket list for me

Haha thanks! By the way the roof rack idea came from your 318!

[CubbyChowder]

Looking good! I have to comment every time I see Calypso, it's just THAT good of a color. Bucket list for me

[Zreberlcoe]

I used some candy-red paint they made for me at the auto paint store. It is translucent and took about 3 coats to make it look right. I then covered that with a 2k clear. It was all done in an aerosol can. Super easy.

Do you know the about cost?

[jeenyus]

What'd you use?

I used some candy-red paint they made for me at the auto paint store. It is translucent and took about 3 coats to make it look right. I then covered that with a 2k clear. It was all done in an aerosol can. Super easy.

[Zreberlcoe]

Did the injector ticking get louder with the #19s?

No I have no ticking sound that sticks out for my exhaust tone/leak

[Zreberlcoe]

[ATTACH]88571[/ATTACH]
Mine turned out great. I say do it.

What'd you use?

[jeenyus]

It's a base clear paint job! And the #19 injectors seemed to have woken the motor up, and given it a little more response and some noticeable power. But also the chip is extremely helpful.

Did the injector ticking get louder with the #19s?

[jeenyus]

Thinking of doing all red tails, yes?

Mine turned out great. I say do it.