2nd e30, 87 Lachssilber Revival

[moatilliatta]

Was that a diesel trunk in front of you?

[mike.bmw]

I liked the video! I've had a few issues with pedal/brake pressure on my car over the years. Swapping out rotors and pads helped a bunch as did replacing the original brake hoses and thoroughly bleeding the system.

[Reichart12]

Video from autocross is now on Youtube!

SCCA autocross in Montana with my 1987 325i e30 - YouTube

[Reichart12]

That would be a crazy autox course to allow you to stay in 1st, yet also be about a minute in duration.

It looped three times. So first go was around the outside counterclockwise, then you redo the first half but then turn sharp inside to cut across and then you get back to basically the beginning and do the outside clockwise. Very confusing to try to explain. A lot of people got lost and had DNF's, hence my first time being way slow just trying to learn the course.

They gave out course maps so maybe I will try to scan that and upload it.

[roguetoaster]

That would be a crazy autox course to allow you to stay in 1st, yet also be about a minute in duration.

[Reichart12]

Signed up and competed in my first autocross event in about six years. A lot has changed with the car including going back to a stock M20B25 engine. And switched up the front suspension and steering rack to the Z3 rack with manual PS and the Dunlop Star Specs II tires. I think that is most of the changes. Was put into the STX class so I guess that's what I'm spec'd for, no clue there. I will make a video about it eventually but I'm slow to put those together. Definitely need better brake feel and to wire up my tach so I know how close to redline I am. Tight course, probably could have stayed in 1st for all of it but would switch up where I shifted to 2nd throughout my different runs.

Run 1: 80.284
Run 2: 72.621
Run 3: 69.492
Run 4: 68.348
Run 5: 68.129
Run 6: 66.811 + 1 cone
Run 7: 66.648

[Reichart12]

Had the car of the month feature for May, thanks to 2mAn for setting that up. I wanted to share some of the photos here just for continuity. And I made a little vlog of taking the photos and going to some cars and coffees that day. Video is just linked so you have to go to my page to see it and not just imbedded, mwahaha. Enjoy!

https://youtu.be/hUtaR6xsiRQ

[Reichart12]

Trying to link in a new youtube video going to cars and coffee a couple weeks ago. Let's see if it works...

[Reichart12]

i have really enjoyed reading this thread! keep up the great work, wish you was still in the bay area as i am planning on visiting California in a few months and the bay was on my roadtrip! could have bought you euro parts

Nice to hear some international traveling may be happening soon. I'm full on euro parts, not sure what else I would want to add right now.

[benwalsh91]

i have really enjoyed reading this thread! keep up the great work, wish you was still in the bay area as i am planning on visiting California in a few months and the bay was on my roadtrip! could have bought you euro parts

[Reichart12]

Went to a couple car shows this weekend. My batteries dies a lot so frequent drives are needed to keep it charged up. Once it warms up a bit more I'll go probing around looking for a parasitic draw. Also my wipers don't work. I pulled the relay and put it back on and then tightened the nuts of the blades and that made them work. But then the next day, they no longer worked, wack. Photos from April 9th and 10th. Yes, it snowed in April.

[Reichart12]

Little trip to cars and coffee last weekend...

Gallatin Valley cars and coffee March 28th 2021 - YouTube

[Reichart12]

Awesome photo! I'd love to find a location like that. I've been stuck in a rut of parking lots and parking garages lately.

That's funny because right before this, I was at the parking garage haha. Lot of new construction happening on the edge of town so there are a lot of empty dead ends and culdesac areas with nice views.

[mike.bmw]

Awesome photo! I'd love to find a location like that. I've been stuck in a rut of parking lots and parking garages lately.

[Reichart12]

Some person on Facebook said we should update our threads. While I think trucks threads are where it's at, I did take some photos of the e30 this weekend. Someday I'll put a real coat of paint on my front valance. I do kind of want to build a little splitter for it. You know, that thin black material cut to shape to stick out 1-2 inches. I don't even know what it's called. But someday. Also, think I might need some type of ducting to funnel more air through. I have noticed my temp gauge sits just a bit higher with this valance compared to the stock chin valance. Curse younger me, putting on a m42 radiator and e-fan because the integrated reservoir looked cooler/cleaner.