wow, just broke 10,000 views today. thank you to everyone for the support.
Announcement
Collapse
No announcement yet.
SLC: 1989 Zinno coupe. Superlight, Super Functional *6spd swap inside*
Collapse
X
-
1989 Coupe build thread: http://www.r3vlimited.com/board/showthread.php?t=312012
IG: @mitchlikesbikes
-
so i'm a dumbass and didn't attach the wiper switch ground when i put the column back together. got that taken care of so i have wipers now. still no headlights but i'm pretty sure i'm just blatantly missing the low beam relay so i need to source one of those, hopefully it's just that simple. my gauge cluster lights are not working. i think maybe none of the interior illumination works without the headlights working so i'm gonna fix the headlights first then figure out the gauge lighting if there are still problems afterward. aside from that my stock seatbelts don't fit around the roll bar very well so i'm going to build some brackets that will move the upper guide back an inch or two to allow more room for the belts to move around. since the weird stock sliding brackets for the bottom don't fit with the roll bar i'm just using a regular guide and 3 bar harness tensioner for the bottom. similar to the configuration on the right in this picture:
instead of stock which looks like this:
1989 Coupe build thread: http://www.r3vlimited.com/board/showthread.php?t=312012
IG: @mitchlikesbikes
Comment
-
build looks awesome. i like the black bumpers with the red.my build thread http://www.r3vlimited.com/board/showthread.php?t=309778
Comment
-
1989 Coupe build thread: http://www.r3vlimited.com/board/showthread.php?t=312012
IG: @mitchlikesbikes
Comment
-
1989 Coupe build thread: http://www.r3vlimited.com/board/showthread.php?t=312012
IG: @mitchlikesbikes
Comment
-
i am excruciatingly close to buttoning things up. i took the car out for a drive and a fresh tank of gas/seafoam this evening. i need to go get a windshield put in tomorrow, then roll the rear fenders. after the roll it's safety/inspection time so hopefully i pass. if i pass that i will be road ready. there's just a ton of random shit i wanna do while i'm driving the car though.
current pressing issues:
spongy brake pedal (need to bleed them)
no interior lights other than on my aftermarket gauges
running a little warm after a long time
hesitated throttle response
here are some mostly finished interior pics (not yet ruined by my ugly tan comfort passenger seat that's going back in):
1989 Coupe build thread: http://www.r3vlimited.com/board/showthread.php?t=312012
IG: @mitchlikesbikes
Comment
-
So dope. How hard was the dash to cover?
Comment
-
Originally posted by ThatOneEuroE30 View PostSo dope. How hard was the dash to cover?
i got a windshield put in yesterday and drove the car a bit more. it's running okay but the throttle response is pretty weak and the power feels super peaky at about 3000rpms. still working out cluster issues. i have no lighting, no fuel gauge, and no speedo. luckily i can pass insp. without a speedo so i'm gonna give it a shot monday morning.
my rear tires are rubbing pretty nasty like so i'm gonna have to redo the fender roll and pull them a bit or just let it ride. i hate rubbing on brand new tires though.
1989 Coupe build thread: http://www.r3vlimited.com/board/showthread.php?t=312012
IG: @mitchlikesbikes
Comment
-
Originally posted by mitchlikesbikes View Postit was kinda hectic because of the cure time but not exactly "hard". now that i'm done i wish i would have spent more time on it. it looks good but could be much better.
i got a windshield put in yesterday and drove the car a bit more. it's running okay but the throttle response is pretty weak and the power feels super peaky at about 3000rpms. still working out cluster issues. i have no lighting, no fuel gauge, and no speedo. luckily i can pass insp. without a speedo so i'm gonna give it a shot monday morning.
my rear tires are rubbing pretty nasty like so i'm gonna have to redo the fender roll and pull them a bit or just let it ride. i hate rubbing on brand new tires though.
Comment
-
1989 Coupe build thread: http://www.r3vlimited.com/board/showthread.php?t=312012
IG: @mitchlikesbikes
Comment
-
car passed safety and emissions first try with no issues. so relieved. i drove it a bunch today and it seems to be running pretty well. rear tires are rubbing bad so im gonna have to figure that out. i need to plug my sunroof hole too. the airflow through it at 60mph+ causes the roof to vibrate and go nuts
1989 Coupe build thread: http://www.r3vlimited.com/board/showthread.php?t=312012
IG: @mitchlikesbikes
Comment
-
Originally posted by eurolife View PostMaking progress, a lot more than I've done to mine in the same time.
Get that i lip on there and never consider volvo lips again :)
I'm assuming this is Corbin?
1989 Coupe build thread: http://www.r3vlimited.com/board/showthread.php?t=312012
IG: @mitchlikesbikes
Comment
Comment