Hennarot S50B32 M3 consumes my spare time

[MPLFoster]

cool

[Eric]

http://youtu.be/nD1goF2hfjU

Sent from my iPhone using Tapatalk

[Eric]

I've acquired a Davis Craig electric water pump and digital controller, and a used MR-2 Spyder (2000-2005) electro-hydraulic power steering pump (EHPS)! I should be installing the EHPS in the next few weeks. the EWP depends on my ability to source a used euro S50 water pump to gut.

[IronFreak]

Did you buy the waterpump direct? or source a used one. I have been eyeballing those for awhile.

P.S......I emailed you back on the welders and other items.

[Eric]

I got it from Chris at partsforspeed.com. He was cheaper than any other vender stateside and had it shipped out that day!

Shoot, I thought I responded, I'll get back to you in a jif.


Sent from my iPhone using Tapatalk

[Eric]

Spent a bit of time poking at things. I hadn't looked at the engine bay in a while, but there is NO space! Where I thought the EHPS pump would fit, was take up with lots of other things. I think the EWP will fit nicely in the lower radiator hose, but even that is tight.

I think this is the best spot for the EHPS. The high pressure line will be a bit longer than I had planned, luckily I bought a 6 foot stick of pipe!
Untitled by ericandshovin, on Flickr

So a very sophisticated bit of template fitting:
Untitled by ericandshovin, on Flickr

And this old cheerios box is ready to be transferred to aluminum
Untitled by ericandshovin, on Flickr

Test fit
Untitled by ericandshovin, on Flickr


Any ideas on how to lessen the kink right out of the radiator?
Untitled by ericandshovin, on Flickr

Untitled by ericandshovin, on Flickr

[IronFreak]

Make and or buy and aluminum elbow to weld to the radiator? Do one from pie cuts or buy something, In fact I might have a bent piece you could use, what the opening on that radiator?

P.S...... Still haven't seen an e-mail ;)

Edit- That's a plastic side tank isn't it.....

[animal]

Awesome stuff Eric! Still got your green turbines over here and never selling them ;)

[Eric]

Make and or buy and aluminum elbow to weld to the radiator? Do one from pie cuts or buy something, In fact I might have a bent piece you could use, what the opening on that radiator?

P.S...... Still haven't seen an e-mail ;)

Edit- That's a plastic side tank isn't it.....

I was actually looking at all aluminum radiators to replace this one and do exactly that. Only problem, this one is perfectly fine.

Awesome stuff Eric! Still got your green turbines over here and never selling them ;)

Haha, sweet! I loved those things, and got so many compliments on them at the ring car park! I was showing somebody a few old pictures of them, so much fun.


My hands are numb from jig-sawing this junk out! Off to a late night run to wallmart to buy another blade.

Untitled by ericandshovin, on Flickr

[Eric]

Machined a bit of aluminum to space out this bracket for the PS pump. Hard line has arrived, now to figure out where to put the PS cooler and routing from the passenger side to the rack and back.

Untitled by ericandshovin, on Flickr


Now to do a bit of welding!

Untitled by ericandshovin, on Flickr

[Eric]

Spare euro water pump came in from Germany yesterday. This lathe has been an excellent purchase!



A few drill bits later...



Sent from my iPhone using Tapatalk

[IronFreak]

OH MAN! What is your swing over on that thing.....I have parts....I need made....

[Eric]

10x24 :up:

[IronFreak]

Just realized you used one of your uprights from that wang to make your parts!

[deeze30]

dream car 0___0