Gr A Replica
Collapse
X
-
Comment
-
First name Real, Last name Mc Coy!FEEDBACK:
http://www.r3vlimited.com/board/showthread.php?t=316212
BMWCCA #398608
IG @yagayo38
"The Best E30's were built with two camshafts four cylinders and sixteen valves!".Comment
-
What do you have to modify in order to change the front sussy from the big control arm to what it has now? Mounting points definitely, did you have to change the hub at all?
And does it make a huge difference compared to standard M3, or is it just chasing tenths?
Amazing car btwComment
-
mmm.. just the pickup on the subframe... there is so much difference on braking, BUT, you are limited on steering lock to lock, since there is a straight rod, vs the curve one on the oem wishbone..
no hub mod
What do you have to modify in order to change the front sussy from the big control arm to what it has now? Mounting points definitely, did you have to change the hub at all?
And does it make a huge difference compared to standard M3, or is it just chasing tenths?
Amazing car btwComment
-
I could be wrong though.1989 BMW 325is | 2019 Ford Ranger FX4willschnitz
Comment
-
M3
There is only a tow hook on the pass side and nothing under the driver side tow hook cover on M3's. Also the hook is vertical not horizontal. All regular e30 1987 all earlier have those tow hooks pictured. If you click on the photo of the m3 shell and zoom in you can read the vin on the cowl. It's a regular WBAA vin not M3 vin which would start off with WBSA. Maybe it was in a bad wreck and they had to replace the front end plus cowl panel(Possibly rust). That would explain the early model e30 front end with m3 rear end?Comment
-
indeed it was, VIN part was replaced then, those tow hooks where cut and a new one was welded...
basically, E30 M3 front end is the same as all E30's, just minor changes, like the tow hooks, coolant reservoir bracket, etc etc. Structural wise, is the same.
Nice eye...
There is only a tow hook on the pass side and nothing under the driver side tow hook cover on M3's. Also the hook is vertical not horizontal. All regular e30 1987 all earlier have those tow hooks pictured. If you click on the photo of the m3 shell and zoom in you can read the vin on the cowl. It's a regular WBAA vin not M3 vin which would start off with WBSA. Maybe it was in a bad wreck and they had to replace the front end plus cowl panel(Possibly rust). That would explain the early model e30 front end with m3 rear end?Comment
-
M3
Well I would love to have my foot on the throttle and that s14 on the other end!Comment
-
Hey Guys...
this is what i've been up to with my car... hope you enjoy!
https://www.youtube.com/watch?v=9meu4HeRS1I[/URL]
Last edited by said; 02-26-2015, 08:01 PM.Comment
Comment