New member, my first E30, from the Bay Area. NEW QUESTIONS EVERY DAY!

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • 2mAn
    replied
    Send Blunt a message about the parts you're looking for.

    Leave a comment:


  • Benjamin_Button
    replied
    Looks like your bracket snapped from corrosion.

    Leave a comment:


  • Navarone
    replied
    So I was driving around the last few days noticing some clunks and my exhaust seemed a little crooked, today I noticed the exhaust was hanging way low, so I go to check it out and the hose clamp and bailing wire broke!



    So I tied it up with the leftover bailing wire and made it back to the shop and added all new bailing wire. Beautiful, isn't it? I have new rubber hanger double Ds and donuts in the mail. Is that bracket complete? It doesn't look like the donut will hold onto anything.



    Also, is this stock muffler with ansa sport tips, or an entire ansa sport muffler? Is ansa a good brand? It's pretty quiet, only real noise seems to be the exhaust leak.



    Very important question. Where do I find 85 318i M10 oil pan gasket upper and lower kits made of that paper fiber composite material, not cork rubber?

    Thanks -Kevin
    Attached Files
    Last edited by Navarone; 07-10-2014, 01:26 AM.

    Leave a comment:


  • Navarone
    replied
    Yay for electrons!

    Got a relay, (GASP $10 bosch!) specs said coil resistance of 82ohms, so 12v / 82ohms = 146ma. Win! (radio actually outputs 10v on remote power line, donno why...) So I got the circuit built in this first pic, this way it tuns on just like the defroster (defogger) switch. Which means it only works with the key in the run position... bleh, that's not gonna cut it. As you can see, I used the plug from the fader (with one pin moved, and another removed) to build a pigtail so that it ran everything in parallel with the defroster switch, except the output on pin 6, which went to the relay which was triggered by the radio. Those pins soldered onto the pigtail aren't thick enough for the factory plug, they were some leftover .187 header pins I had lying around, so I had to thicken them with solder to get them to stay in. I'll be buying new ones or maybe I think I'll take apart the speaker fader and wire that up to the pigtail so that it's factory BMW male pins mating with factory BMW female sockets. That means taking the dash apart again, but then the wires will be safer.



    Rebuilt it with the constant 12v from the radio (factory red/green) powering the switch through the relay and the the output on pin 6 to the antenna, works like a charm! Now radio triggers relay that switches on constant 12v to new switch on pin 4. Here's mocked up, it's a tight fit and had to take the gauges out again to get access to move wires around. I could do it in my sleep!



    All mounted in and working. So proud! And I only blew one fuse, number 21 for the constant 12v on the factory rd/gn wire. There's a nice burn mark on the case of the stereo!



    I'll be installing the amp and sub soon, or maybe just the amp and some larger speakers in the rear deck. At that time I'll make a dedicated constant 12v with fuse to power the stereo. The rd/gn line is on a 7.5 amp fuse and holds fine with the volume up, but I don't want to blow out the clock and dash etc again, that's annoying.
    Attached Files

    Leave a comment:


  • Navarone
    replied
    Got a couple small projects worked on today.

    New odometer gears. Thanks Garagistic!


    Checked on the way home, GPS said 6.8 miles, trip said 6.5 and odo did about 6.8 (odo has no tenths so dunno really) My tires are ~3.14 inches larger circumference so maybe that makes up for it.


    Also got a dome light and that weird plastic piece it mounts too from a nice lady in Hawaii who just asked me to pay shipping. Sadly it broke too during shipping.


    I also got my bike rack mounted, it's a Hollywood F4 heavy duty and it's adjustable to fit hatchbacks or trunks. It didn't fit right on the e30 so I had to drill new holes and make it fit. I don't have pics mounted because it was dark when I finished.

    You can move the bracket and two bolts in "D" to the two holes in "G" position so that you can mount it on a trunk but I needed an extra few inches to make the angle of the bars more level and to clear the trunk, so I drilled an extra hole above "G" so that the bolts "D" went through where "G" and "H" are. Fits pretty well, pics to come.


    I also installed the rear defrost switch as the antenna switch and it works but the lights don't light up yet. Inside the switch the battery powers the antenna relay and the light, and that draws more than the max of 200ma that the radio instructions say not to exceed. I'll need to make a small relay circuit that will take the radio output, current limited, to trigger a small relay that will then use battery power to tell the antenna and lights to come on or dim just like the normal switch. I'll have pics of that next time, but it's just an extra switch in the dash. Looks almost factory except for not having an emblem on it, but neither does the power window breaker.
    Attached Files
    Last edited by Navarone; 07-08-2014, 10:07 PM.

    Leave a comment:


  • Navarone
    replied
    Lookie lookie what I got!

    Maintenance records! You called it golde



    Now I know about 15 years ago they put in new shocks, springs, cat converter, clutch kit, clutch slave cylinder and exhaust header bolts.
    And holy crap it had 160k miles in 2002 and the odo broke 10k miles after that. The odo sits at 170k now, and for about the last 12 years. Must be way over 250k miles on this bish WOW!
    Attached Files
    Last edited by Navarone; 07-04-2014, 11:42 PM.

    Leave a comment:


  • Navarone
    replied
    The odometer doesn't work, the small gear was broken, so I go to fix it, I bought a new gear and everything, simple enough right?



    Nope. These gears are weird and rubbery, and covered in some weird waxy stuff that is making it skip gears and give me the cancer.




    I begin to clean it out, but being too rough with them and they'll crumble... So now I have a whole new gear set in the mail.


    I also wanted to install a switch for the radio antenna because I don't like driving around with it up, but the stereo always puts it up, even if not on AM/FM. So I'll order a lighted defroster switch and sand off the symbol and make a new symbol for an antenna. But for now I made the wiring so I could test and have it ready to just pop in. That was the hole for the speaker fader, but who needs that junk!? When the new switch comes I'll add wires for the backlight.



    This is just to round out the 5 pic max. I need a thumbscrew for behind the dash under the cluster.
    Attached Files

    Leave a comment:


  • Navarone
    replied
    Somebody poisoned the waterhole.



    That's the water pump.

    I have no idea how bad the timing chain is, so I'm gonna pull it all, do the timing chain, water pump, valves, oil pan and slam it back in.
    Attached Files

    Leave a comment:


  • Navarone
    replied
    Originally posted by golde30
    You need to pressure test the cooling system. If there is a leak, you aren't helping by having tap water in there. Any decent shop will have a pressure tester, test takes like 1min to perform, once engine is cooled down of course.
    Ok awesome, I'll go get that done, thanks.

    Originally posted by e30vert
    Hey Guns of Navarone - I posted the .pdf version of the Bently for you here.

    Download it and save to a Laptop or Tablet or something and use that. Lots less grease on pages that way -Plus I just saved you some


    Im such a swell guy , but I almost broke my arm patting myself on the back
    That's great, it's searchable and everything thanks!

    Leave a comment:


  • e30vert
    replied
    Originally posted by Navarone
    I haven't bought one yet, it looks like there are a couple versions, which should I get?

    Hey Guns of Navarone - I posted the .pdf version of the Bently for you here.

    Download it and save to a Laptop or Tablet or something and use that. Lots less grease on pages that way -Plus I just saved you some


    Im such a swell guy , but I almost broke my arm patting myself on the back

    Leave a comment:


  • golde30
    replied
    You need to pressure test the cooling system. If there is a leak, you aren't helping by having tap water in there. Any decent shop will have a pressure tester, test takes like 1min to perform, once engine is cooled down of course.

    Leave a comment:


  • Navarone
    replied
    Silly car keeps getting hot, low on coolant (tap water like a poor) every 3-4 days. No coolant in oil, no steam from exhaust, no leaks up front. "Where does it go?" said the dad to his fat little son about the cake that went missing?

    Today I checked and there were a few drops on the "big plastic protective thingy" (yes that's a technical term) under the radiator overflow line, but no dripping from the line. That's my only hint. Think the radiator cap could be bad?

    Leave a comment:


  • Navarone
    replied
    Ah ok, last time I searched there was some overlap in years or models or something and someone said get a specific one for the 85 318i because it's a weird year or something. I don't remember where or when I saw that info though :/

    Yeah I'd be open to buy yours, what are they going for about $40?

    Leave a comment:


  • golde30
    replied
    I think there is only hard and soft back editions. I mite even have an extra one for sale, gotta dig around.

    Leave a comment:


  • Navarone
    replied
    I haven't bought one yet, it looks like there are a couple versions, which should I get?

    Leave a comment:

Working...