Announcement

Collapse
No announcement yet.

formyhealth - 1991 318is Build Thread - now with 1000% more 1JZ-GTE

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    I assume there is enough drain from the back to the front like the stock ones are?
    sigpic

    (clicky on piccy to get to thread)

    Comment


      Originally posted by econti View Post
      I assume there is enough drain from the back to the front like the stock ones are?
      Hopefully!

      I'll be baffling the sump area and may end up inserting a slanted plate inside of the flat section to give it the proper drain angle. Or I give the whole engine 1 or 2 degrees of forward slant which should do the same thing.

      Comment


        I got the engine back up on the stand today to start working on lengthening some of the harness wires. Will be glad to be done with this part!

        Sent from my SM-N950U using Tapatalk

        Comment


          As an owner of a Focus ST and E30, I cant wait to see this in action
          1987 325 Turbo

          Comment


            Originally posted by iso_hi View Post
            As an owner of a Focus ST and E30, I cant wait to see this in action
            Can't wait for all of the torques!

            Sent from my SM-N950U using Tapatalk

            Comment


              Diy big brake solution arrived! These are 4 pot calipers from a 1991 rx7.





              Sent from my SM-N950U using Tapatalk
              Last edited by formyhealth; 03-21-2019, 07:24 PM.

              Comment


                I need bigger wheels but these are going to be sweet!

                Sent from my SM-N950U using Tapatalk

                Comment


                  Gunna be beastly.

                  Comment


                    Well, I scored one hell of a deal today. 15x7 Team Dynamics wheels with healthy looking Toyo Proxes RR slicks, $300!! Quite happy and they fit over the rx7 brake calipers.


                    Sent from my SM-N950U using Tapatalk
                    Last edited by formyhealth; 05-30-2019, 06:50 PM.

                    Comment


                      Kinda jumping around a bit on projects but worked on fitting the front valance today.

                      Sent from my SM-N950U using Tapatalk

                      Comment


                        Got the oil cooler and intercooler installed today, and found some nice 6AN adapters for the steering rack lines. I'm going to go with a Volvo pump to save space in the footwell area.

                        Sent from my SM-G973U1 using Tapatalk

                        Comment


                          Oooooh [emoji3]

                          Sent from my SM-G973U1 using Tapatalk

                          Comment


                            Originally posted by formyhealth View Post
                            Oooooh [emoji3]

                            Sent from my SM-G973U1 using Tapatalk
                            What's that?

                            Sent from my SM-G960U using Tapatalk
                            '89 325i OBD2 S52 BUILD THREAD
                            Shadetree30

                            Comment


                              Originally posted by Sh3rpak!ng View Post
                              What's that?

                              Sent from my SM-G960U using Tapatalk
                              That's a wireless (infrared) button pad that sends a signal to a programmable relay controller. It mounts behind the steering wheel and I'll be using it for turn signals, wipers, launch control ;) etc.

                              Comment


                                Originally posted by formyhealth View Post
                                That's a wireless (infrared) button pad that sends a signal to a programmable relay controller. It mounts behind the steering wheel and I'll be using it for turn signals, wipers, launch control ;) etc.
                                that sounds pretty damn cool :p saving this idea for future use
                                '89 325i OBD2 S52 BUILD THREAD
                                Shadetree30

                                Comment

                                Working...
                                X