The street shark e30

[agent]

New axles-

Make sure the outer boots of the axles aren't rubbing the bottom of the shock (or are close enough to under load). When I did the axles on Lola the two outer boots were shaped differently. One of them rubbed itself open against the shock and I had to get it replaced under warranty.

[Bggdnssnguy]

Thanks jebus! My diff isn't ruined. The fluid I had in there was 1( to thick ) and 2( had no friction modifier, causing the clutches to stick ). Put some 75w-90 synthetic ls fluid from Mobil-1 in there and it drives so much better. I can here everything that's happening in that diff with the poly bushing. But oh well.
On another note I ordered some 5d black carbon wrap for sunroof and door pockets.
This car is a Guinea pig for my truck build. Can't wait till it arrives.

[Bggdnssnguy]

Haha thanks. The idle is down to 1000 at idle now..

So I talked to a buddy about my car. He said I prolly put to thick of diff oil in it. So I'll have to buy some more tomorrow. Causing the clutches to make noise when turning and disengaging.

Here's some pics from last night.
Old mount-


New poly bushing in-


Old sway bar link-


New link-


New axles-


I know most people don't respond to my questions. But I'm not trying to ruin this car. I'm trying to make it better. So if I made enemies, I'm sorry.

[tylerhammack]

welcome to the club! good luck with the idle issues and what not

[Bggdnssnguy]

So worked on the car.
New axles in, poly bushing in the diff cover and resealed the the cover and put fluid back in, new sway bar links and turned rear rotors and scuffed the pads. Stops a whole lot better..

Now at low turning speed I have a weird noise. Could the poly bushing cause this noise? It is defiantly stiffer out back when letting off the gas at a low speed, you can feel the it kinda clunk or disengage I should say.. Hmm idk. But car drives fine.

[Bggdnssnguy]

So ordered 2 new rear axles, rear sway bar bushings and sway bar end links.
While I'm doing all that I'll do another diff fluid change and put the poly diff bushing in.

That reminds me, I forgot to order a diff gasket. Guess I'll be using nissan rtv to seal it. That's what we use on our diffs.

Here's a photo I took this morning while out for a drive.

[Bggdnssnguy]

Well looks like the daily is getting more attention then my truck..
I knew both my outer cv boots were torn. But today I can hear a creak in the rear. Sounds like the driver rear wheel is where it's coming from..
What's y'all opinion on this. Should I replace the torn boots and the bearings? Just to get rid of knowing I will eventually.
And my check light for oil came on. It was on the check panel. So I'll be replacing the oil cooler o ring and valve cover. That's where it's leaking..

My auto trans hose is leaking also on my car. It's the one that goes on top of the radiator. Is that in or out line?

Thanks if anyone replies.

[Bggdnssnguy]

Haven't updated in a minute. The exhaust bracket that wraps around the muffler broke( the tack weld from BMW) so I reweldednitbto my liking. And now it's held tight but now the heat shield rattles. Fml. And yes I painted the welds when it cooled.


Added my skid plate, it drags more now on certain bumps. But it's serving its purpose and sparks in the dark.


Same day, went to an e30 meet. Had a blast meeting new people!




And a random pic while getting my hair cut.

[Bggdnssnguy]

So getting a skid plate from a member for a great price. Will be here Monday.

Tonight I was coming home and a here some high pitch dragging. The only exhaust donut on muffler broke, which then cause the other hanger to slide off. Drug it about 3 miles to my house and up my steep rock driveway at about 15 mph.. But it's rigged and better then ever.

[Bggdnssnguy]

And she's slammed as hell!! On 195/50/15 15x8's


If anyone reading this has or knows where I could get a decent skid plate. Let me know please, I drug the rack on interstate already. Not hurt tho!
Anyone raised these engines a little bit?

[Bggdnssnguy]

Got my fronts. The red ones are what's going on tomorrow.
There's a little size difference.


Excited to finally get it closer to the ground.

[Bggdnssnguy]

Still haven't figured out why the LEDs don't work. The done light will flash when I start car but turn off when car is running? Weird shit.
Got 4 of 6 lowering springs, bought from a member on here and killer fast shipping. Only using rears and have 2 fronts that will lower more than the eibachs. Will get other fronts Monday and install Tuesday after work with a fresh alignment.

Got my yellow headlight wrap in. And did my fogs, high beams and reverse lights.



Here's my dash cover that still has wrinkles in it.


Washed my car after work yesterday and had to take a pic next to a m6 at the Maserati dealer next door.

[Bggdnssnguy]

Installed LEDs in my dome and tag lights. But won't work, has anyone else tried an led swap? I'm gonna go to advance and get some regular bulbs and see if that will work..

[Bggdnssnguy]

So I received my dash cover Wednesday. And from it being rolled up its a little lumpy, so Tennessee heat will fix that.

Also got my dome lamps and tag lamps in also. And ordered yellow film for headlights and fog lamps for a euro style look, since I'm poor and can't buy the actual yellow hella lights.

Both of those thanks to members on here! Thank you.
Wanna add that I bought a set of springs from a member by the name of Alonzo, and he's an awesome guy to deal with. Super honest and actually gives a shit about stuff when usps loses it.
I'll add pics of stuff when I get my lights in.

[Bggdnssnguy]

Not my doing. Was done by PO. There is nothing in the trunk besides a spare and jack.