hey, since when is there stuff like this going on is SC?????!!!
-
-
with all thats been going on around here, i finally got it running this weekend!
IA: to explain, i also had problems with megasquirt, i couldnt get a tach signal. it was coming in from the EDIS and i had a scope on the tach input on the chip and could read a signal there but i didnt look closely to realize the signal wasnt going low enough for the cpu to actually see the signal. so me and my friend traced the problem to a faulty 4n25 (opticoupler) and we just bypassed the circuit by installing pull down resistor network. the EDIS provides such a clean signal that all we really needed was to bring it from 12 down to 5 volts. the opticoupler circuit is really only needed for protecting the cpu from the ignition coil because it is prone to feeding back voltage spikes - i'm using a coil pack.Last edited by xLibelle; 09-17-2006, 05:03 PM.Comment
-
Nice video.. I'm very impressedRecent Rebranding!!
Visit Garageaholic for all of your E30 Swap Needs!
E30 SM62/S62
E30 M60 V8
E30 M30 Big 6!
Check out this E36 N54 Swap Build
Instagram.com/garageaholic
Youtube.com/garageaholicComment
-
Very nice work...reminds me alot of mine!
Comment
-
About friggin time man, lol. I think you are a slower worker than me :)Rollin' with a GeistkuchenComment
-
Wow, so clean!!!Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205
OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827Comment
-
I love your m20s sound.90is, longtube headers/straight pipe/mark d 18# 93 0ctane chip/18# injectors/vogtland springs/bilst. sports
:firehop:Comment
-
meh wait till you see pics of James engine bay... its fucking perfect, literally.Comment
-
I soo wish my engine bay could look like that. Good workComment
-
Looks hella good! congratsComment
-
Ive never seen a clean engine bay on a race car. Its usually not worth the effort. It will look good until you take it out a few times though I guess.-Nick
M42 on VEMSComment
-
-
hehehe, i came across this video - its what came out of the car:
*tear* it was just SO awesome!Comment
-
dude congrats!!!!!
i really should have done the same thing you did in hindsight...i jumped straight into a built motor without first learning engine management...props for good decisions and a successful swap!!!Comment
-
i dont think many of you got to see this.
let me just say, dont try it while drunk. it takes forEVERAttached FilesComment
-
Comment