Originally posted by dadsbmw
View Post
Announcement
Collapse
No announcement yet.
Dmanb2b's Alpine 318is - S52 is ALIVE
Collapse
X
-
205's should be fine on an 8 with final ET3 with maybe a light roll. Might get away with 225's with a good roll even.Originally posted by priapismMy girl don't know shit, but she bakes a mean cupcake.Originally posted by shamesonUsually it's best not to know how much money you have into your e30
- Likes 1
Comment
-
Originally posted by dmanb2b View Post
I will probably regret this but trying to squeeze 205/50. I went with 18mm front and 20mm rear 42 draft design adapters. The setup will like require fender rolling and/or pulling. Keep you all posted. Should have new tires next week.
Comment
-
Originally posted by benwalsh91 View Post
I could have made you 15mm 4x100 to 5x120 adaptors if needed.1991 318is
2004 330ci
2011 335d
Comment
-
Originally posted by dmanb2b View Post
Got any pics or links? Depending on how this fits, I may be interested. I thought most won't go below 18mm, for safety reasons, so curious what your setup looks like. I'd much rather run 15mm in front and 18mm in back.
its perfectly safe to run 15mm but i wouldn't make them any smaller. The issue you have is the standard thread on a bolt is normally 18mm so the bolt will bottom out so you have to trim them. However, if you fit a stud kit on the adaptor you wont have an issue of them bottoming out or needing to go through the painful process of trimming 3 down on 20 bolts.
I am in England, but i do ship anywhere in the world, last time i sent some to California i believe it cost me circa £40 for the post and that was airmail 5 days, insured and recorded.
- Likes 1
Comment
Comment