92 Mtech cabrio...with Tesla power

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • jon volk
    replied
    Getting close. Had to re-tune the inverter for the taller tires. Just a couple more tweaks and it'll be at my goal of 10.xx 1/4 and 2.xx 0-60 on the street.

    Leave a comment:


  • jon volk
    replied
    Originally posted by z168
    Love what you’ve done. Hope you can post photos of the completed work for posterity
    I’ve got a bunch of outtakes from my PBMW shoot I need to post one of these days. Here’s how it sits today Sent from my iPhone using Tapatalk

    Leave a comment:


  • z168
    replied
    Love what you’ve done. Hope you can post photos of the completed work for posterity

    Leave a comment:


  • jon volk
    replied
    Originally posted by lukeADE335i
    Nice work Jon. 11 second quarters on street tyres is pretty awesome

    What are the drag rules like in the US? If you dip below a 10.0 in Australia, you have to fit a roll cage or you're banned from the track. I'd imagine at some point on slicks you might get there.
    Hahahah, theyre a joke here. A convertible needs a bar at 13.49, coupe/sedan at 11.49 and a full certified cage at 10.00. With how accurate the Dragy GPS is, I dont have any desire to drive 2.5 hours each way to get kicked out on one pass only for a piece of paper that says the same thing a Dragy.

    These pulls are with zero wheel spin and all managing power application through the software tuning. Id like to try some slicks or better tires. These are just super cheap Sumitomo HTRZ-2's. Id like to get it into the 10's on a standard street tire, which should be achievable.

    Leave a comment:


  • lukeADE335i
    replied
    Nice work Jon. 11 second quarters on street tyres is pretty awesome

    What are the drag rules like in the US? If you dip below a 10.0 in Australia, you have to fit a roll cage or you're banned from the track. I'd imagine at some point on slicks you might get there.

    Leave a comment:


  • Nate37
    replied
    Fairly new to the site and just ran across this.... absolutely insane, I love it! I think my favorite part of the whole build is the flip-up mechanism behind the grille. Absolute artwork. Well done sir.

    Leave a comment:


  • nando
    replied
    Meanwhile, I've made tens of thousands owning Tesla stock. I could have bought a Model 3 by now...

    I don't do Instagram, but I'm really glad this is still moving forward. In E30s, gas is still king - but you're seriously pioneering here. Keeping in mind, hopefully people will still find E30s interesting for decades to come - for projects like this, that keep them relevant.

    Leave a comment:


  • Northern
    replied
    I had no idea you had a build thread on r3v.
    I've been following on Instagram for at least a year I think, but I figured you must've moved on from the forums. I love the updates

    Leave a comment:


  • jon volk
    replied
    Been fine tuning the motor/inverter. Almost time for some slicks.

    Leave a comment:


  • jeenyus
    replied
    Originally posted by nando
    BTW, there's an electric hypercar manufacturer, Rimac, that started out doing an electric swap on an E30 (he built his own motor, controller, etc). https://en.wikipedia.org/wiki/Rimac_Concept_One
    Now they are partners with Porsche.

    Leave a comment:


  • nando
    replied
    How the heck did I miss this? I also love how an OG from 2004, comes out of nowhere and does something so crazy. I just saw a video of a Model S motor tear down (which I think is what you have there?), and immediately thought this would be a cool idea.

    An interesting thing is electric motors work better with an MT transmission than an AT. The ATs are not efficient and they will also explode when changing gears due to the high torque (there's a reason most electric cars only have one or two gears). And when you come to a stop/start, you do't have to put it in neutral or push in the clutch, since the electric motor can't actually stall. I know that's not what you have here, but that would also be a pretty fun drive I think.

    BTW, there's an electric hypercar manufacturer, Rimac, that started out doing an electric swap on an E30 (he built his own motor, controller, etc). https://en.wikipedia.org/wiki/Rimac_Concept_One

    Leave a comment:


  • rzerob
    replied
    I sent you a PM.

    Leave a comment:


  • jon volk
    replied
    Making progress tuning. 11.87 on the brakes. Sent from my iPhone using Tapatalk

    Leave a comment:


  • IceWhite
    replied
    This is Awesome!!

    The Vid for those that have not seen it yet: Tesla-Swapping a BMW E30 Means You'll Never Miss a Yellow Light Again


    Leave a comment:


  • paynemw
    replied
    I saw your video on /Drive, excellent my man!

    Leave a comment:

Working...