somebody make me some swaybars.. (more pics pg 3)

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • nando
    replied
    the front is unique - but our swaybar links are similar to the M3.

    Leave a comment:


  • moatilliatta
    replied
    the rears are the same right? i was also thinking the front was an m3 one or something like that. ive herd people running just stiff springs and no sways, I may do that. i dunno.

    Leave a comment:


  • cheades
    replied
    Originally posted by DanielHStout
    I always wonder if it would be possible to weld reinforcements onto stock ix sways to make them stiffer...


    Cut some pieces like this to length and to the right angles then weld them on with in a logical fashion... I think it could be done.
    I believe the heat from the welding would make the swaybar lose its strength

    Leave a comment:


  • DanielHStout
    replied
    I always wonder if it would be possible to weld reinforcements onto stock ix sways to make them stiffer...



    Cut some pieces like this to length and to the right angles then weld them on with in a logical fashion... I think it could be done.
    Last edited by DanielHStout; 11-28-2007, 08:18 PM.

    Leave a comment:


  • nando
    replied
    full stiff up front, 2/3rds rear. the only time I change the fronts is when I'm driving on roads with chunks of ice everywhere.

    it's commonly misunderstood how they affect the car; running them stiffer in the rear doesn't make for more oversteer - rebound mostly affects transitions (like slalom). compression isn't adjustable.

    Leave a comment:


  • moatilliatta
    replied
    what do you have your konis set on when you auto-x?

    Leave a comment:


  • nando
    replied
    Originally posted by cheades
    Sorry, its in Burlington. Found the name and its called Speedmart (360-757-4473), if they don't make that sort of stuff I am sure they will point you where to go.
    cool, thanks!

    Leave a comment:


  • cheades
    replied
    Sorry, its in Burlington. Found the name and its called Speedmart (360-757-4473), if they don't make that sort of stuff I am sure they will point you where to go.

    Leave a comment:


  • TwoJ's
    replied
    Going with the title of the thread, would it be cost effective to produce sways? I'll have access to a full machine shop, and I could make some pretty easily I think. What kind of steel would need to be used?

    Leave a comment:


  • backtrail69
    replied
    There is a race shop at the end of the street behind the Les Schwabe in Burlington. I haven't been before, but there is a race shop there.

    Leave a comment:


  • moatilliatta
    replied
    If you get them sway bars, let me know how these sway bars work out.

    Leave a comment:


  • nando
    replied
    Originally posted by cheades
    I will try to track down the name of the place I have gotten some stuff through. They are right by Bearings Inc and you can see it from I5, turn down the road Les Schwab is at.
    where is this? I live down the road from a bearing place and les schwab. ferndale?

    Leave a comment:


  • cheades
    replied
    I will try to track down the name of the place I have gotten some stuff through. They are right by Bearings Inc and you can see it from I5, turn down the road Les Schwab is at.

    Leave a comment:


  • WillisE30
    replied
    Originally posted by nando
    :pimp:

    the best part? they were free and say NASCAR on them.
    If they say Nascar on them you KNOW they're good.

    Leave a comment:


  • backtrail69
    replied
    You are ALWAYS stylin' with those shades... err safety glasses..

    Leave a comment:

Working...