S50 E30 Project...

[FredK]

Shh. That post was for kellie. :razz:

[Mtriple]

Shh. That post was for kellie. :razz:

Haha, thats good info right there. I never worried about the CEL light because I wasnt running the factory cluster and we dont have to worry about smog shit here in Minnesota.



Sorry to hear about the flywheel. I can tell you that I used all new bolts when it was installed. I was at Blunt's garage at the time and using his tools, so its very likely that it was done half ass.

Blunt, Avi, and Mr. Stainless... you get the idea.

[Farbin Kaiber]

Blunt, Avi, and Mr. Stainless... you get the idea.

I've read about porn's that start out like this...^^^ Just need a twink to knock on the rollup with a Pizza.

[MR 325]

Don't put an aftermarket header in there, the referee won't like that!!

[kishg]

ahh the uuc flywheel bolts.. :)

[Mfever]

Thank you for catching that. I am going to have the RS003s refinished. I sold my RS001s over a year ago.

Make sure to document your bbs rs 003 rebuilt, because I just bought the same wheels!

[Ben Carufel]

Make sure to document your bbs rs 003 rebuilt, because I just bought the same wheels!

Sure, I can tell you how it'll go:

- I'll take the RS003s off.
- I'll put them in the back of my truck and drive to the wheel refinisher.
- I'll drop them off.
- Two weeks will pass.
- I'll drive to the wheel refinisher in my truck.
- I'll pay for the wheel refinishing.
- I'll load the RS003s into my truck.
- I'll take them home.
- I'll mount them on the car.
- I'll drive.

Let me know if you need any more detail :).

[Ben Carufel]

ahh the uuc flywheel bolts.. :)

Yeah, I've heard from several people that this isn't the first time this has happened.

[Ben Carufel]

Don't put an aftermarket header in there, the referee won't like that!!

True, true.

[Mfever]

Sure, I can tell you how it'll go:

- I'll take the RS003s off.
- I'll put them in the back of my truck and drive to the wheel refinisher.
- I'll drop them off.
- Two weeks will pass.
- I'll drive to the wheel refinisher in my truck.
- I'll pay for the wheel refinishing.
- I'll load the RS003s into my truck.
- I'll take them home.
- I'll mount them on the car.
- I'll drive.

Let me know if you need any more detail :).

How much fuel will you be running in the truck that will deliver the said wheels to the refinisher?

[dirty30]

how much fuel will you be running in the truck that will deliver the said wheels to the refinisher?

lol

[kellie]

Sure, I can tell you how it'll go:

- I'll take the RS003s off.
- I'll put them in the back of my truck and drive to the wheel refinisher.
- I'll drop them off.
- Two weeks will pass.
- I'll drive to the wheel refinisher in my truck.
- I'll pay for the wheel refinishing.
- I'll load the RS003s into my truck.
- I'll take them home.
- I'll mount them on the car.
- I'll drive.

Let me know if you need any more detail :).

Two weeks? I think you're being a bit optimistic.

FredK, thanks for the info. Would you happen to have a wiring diagram? I'm hoping the ref will be okay with a little LED in the dash that's labeled as a check engine light.

[Mtriple]

Two weeks? I think you're being a bit optimistic.

FredK, thanks for the info. Would you happen to have a wiring diagram? I'm hoping the ref will be okay with a little LED in the dash that's labeled as a check engine light.

Good idea on the LED. To keep the continuity with the green turn signal lamp, go to radio shack to pick up another. They offer them in green, yellow, and red. I you cant find them let me know, I think I have some. I'll send you a couple.

4th, 5th, and 6th choice down on this link:

http://www.radioshack.com/family/ind...goryId=2032297

[constructor]

Sure, I can tell you how it'll go:

- I'll take the RS003s off.
- I'll put them in the back of my truck and drive to the wheel refinisher.
- I'll drop them off.
- Two weeks will pass.
- I'll drive to the wheel refinisher in my truck.
- I'll pay for the wheel refinishing.
- I'll load the RS003s into my truck.
- I'll take them home.
- I'll mount them on the car.
- I'll drive.

Let me know if you need any more detail :).

Excellent information. I now know what I'm in for when it comes time to refinish mine :).

[Farbin Kaiber]

I say use a yellow/orange LED, or pick up a used motorcycle cluster and get the small lamp out of it.