my own personal hell

[JTapper]

Yeah, this could be a cheap alternative to the $1200 manifolds for my car, except you would have to solder 2 more ITB's on the end cuz I have a V8.

do you have a pic of the v8 manifold?

You just showed the world how big of an idiot you are.




Just sayin'....

[Fidhle007]

Yeah, this could be a cheap alternative to the $1200 manifolds for my car, except you would have to solder 2 more ITB's on the end cuz I have a V8.

to be honest if i had an extra m42 manifold i would give it a shot. do know it is a time consuming process. and not an inexpensive one at that. if you supplied the intake manifold your other necessary expenses would be plenum around $20 runners around $10 the throttlebodies around $150 silicone tubing $80, t-bolt clamps 16x$3(<---best option if you plan to do forced induction) or hose clamps $16, vaccume line $3, and then labor charges, and depending on whether i need to fabricate a throttle linkage or not there would be a cost for that as well - if i did need to fabricate one i would ask that you send me a throttle body you're not going to use and the intake manifold.

in total if you supply the intake manifold and the throttlebody (if necessary) you're looking at about $315 in parts alone plus labor frankly it's a time consuming process, not difficult just time consuming.

do you have a pic of the v8 manifold?

i have used no solder on my setup whatsoever. and have no plan to do so.

i would consider making several of these if there were working guinea pig engines. mine should be done sometime this or next weekend. course i have been saying that for nearly a month

[Massive Lee]

With the help of a grinder, one can reshape the world. ;)

[whatt18yahoo]

massive lee i know that was a jab but i found it absolutely histerical. LOL HAHAHAHAHA

VERY WELL PLAYED

because i don't have anything to show (yet) for what happened last night i won't mention it just yet but wooohooooo!!!!!!!!!!!!!!!!!!!!!!

pics to come next week... lots of them... yay...

[Massive Lee]

I am glad you took it well. It did was a friendly jab. ;)

Lee

PS I have three angle grinders, and everyone has a different purpose. So yes, they are very usefull.

[ben312]

Can you make more ITBs like that? Granted i have an m44 swap, so maybe you could tape the last 2 holes shut?

Group buy?

to be honest if i had an extra m42 manifold i would give it a shot. do know it is a time consuming process. and not an inexpensive one at that. if you supplied the intake manifold your other necessary expenses would be plenum around $20 runners around $10 the throttlebodies around $150 silicone tubing $80, t-bolt clamps 16x$3(<---best option if you plan to do forced induction) or hose clamps $16, vaccume line $3, and then labor charges, and depending on whether i need to fabricate a throttle linkage or not there would be a cost for that as well - if i did need to fabricate one i would ask that you send me a throttle body you're not going to use and the intake manifold.

in total if you supply the intake manifold and the throttlebody (if necessary) you're looking at about $315 in parts alone plus labor frankly it's a time consuming process, not difficult just time consuming.

Yeah, this could be a cheap alternative to the $1200 manifolds for my car, except you would have to solder 2 more ITB's on the end cuz I have a V8.

do you have a pic of the v8 manifold?

i have used no solder on my setup whatsoever. and have no plan to do so.

I <3 r3v. This thread wins the interwebz.

[makaveli2k]

I'd also be interested in a soldered inline 8 ITB setup for my V8.

I think my v8 unicorn will be a heck of a lot faster with it.

[whatt18yahoo]

I'd also be interested in a soldered inline 8 ITB setup for my V8.

I think my v8 unicorn will be a heck of a lot faster with it.

lol
hahahahahahaha

this is why i asked to see a pic of the intake manifold

[Jesse30]

hey yahoo, i still wanna see dyno charts. im going to keep hounding you till you post them. no matter how much you dont respond.


post the charts of your amazing super m20 2.7 stroker that makes mathematically impossible numbers douchebag.

[whatt18yahoo]

every so often i decide to do a project, every so often i have money, and eventually every so often christmas happens. today folks was kind of like the third day of hanukaah because parts have been coming in for the last few days and today i decided to take some pictures of the parts that came in.




that says a/r .70


if you look closely you can see the line lock solenoids in this pic

btw all those braided lines are for the oil filter relocation kit, i am going to go straight to the oil cooler then to the filter block (the port for turbo feed and oil pressure are both located here) then to the engine.

oh and yes i know that is a lot of v band clamps but frankly it has a purpose i am using 1 at the turbo 1 at the bottom of the downpipe 1 at the front of the cat one at the back of the cat and 1 forward of the stainless steel exhaust tip

that is an aeromotive fuel pressure regulator and the oddly small silver cylinder is a walbro 255

[JasonC]

Mmmm...shiny stuff!


I want to boost my Festy now.

[whatt18yahoo]

Mmmm...shiny stuff!


I want to boost my Festy now.

alright i gotta know what this means boost your festy???

please explain cause the best i can guess is best you fiesta but i have no idea please explain

[JasonC]

alright i gotta know what this means boost your festy???

please explain cause the best i can guess is best you fiesta but i have no idea please explain

It means, I would like to turbocharge the 1.3L in my Ford Festiva.... Seeing a new turbo and IC and other stuff you pictured made me think.

[ben312]

It means, I would like to turbocharge the 1.3L in my Ford Festiva.... Seeing a new turbo and IC and other stuff you pictured made me think.

My visit at NADC today got me thinking about alota stuff, hearing some of those turbos made my knees weak, hearing the high performance engines run....ugh. I'm going into paint and body, I will get grades for doing body work on my cars. Also free shop time = win.

[BoxDriver86]

Turbo Mazda 323 GTX engine in a Ford Festiva. Game over.


Do it Jason. Do it.

Sorry to hijack the thread...oh...nevermind...I'm not. I'm just glad I could add some value.