My E30M3 S14B23 -> S50B32 -> RB26DETT. We are alive!! p.28

[logie74]

Hi mate looks good!

How did you mount the front sway bar? Is it off e36?

Are you happy with your sump conversion?

Cheers

[Ant_e30]

brilliant looking car, love the on-going progress!

those driveshafts look pretty beefy. i've got my eye on them on eBay as i am considering getting them for when i do an SR20DET conversion.

[Mr. Horsepower]

3 Questions;

-what did you use to get your motor that clean?
-what dye did you use on your carpet?
-what is your dash wrapped/covered in?

thx

-I used a cleaner like the Loctite Super Clean, glass blasting and paint
-The dye I simply bought on a textile shop, did cost almost nothing
-Dash is flocked. Procedure for that is the dash is sprayed with epoxy glue and then electrically charged nylon threads are sprayed on. The charge makes the nylon stand when it hits the glued surface.

[dball4]

Mind = Blown.

[Jszy25]

amazing car...

[coop]

3 Questions;

-what did you use to get your motor that clean?
-what dye did you use on your carpet?
-what is your dash wrapped/covered in?

thx

[goarmy]

ultimate driving machine

That is one very impressive machine great job brother

[Mr. Horsepower]

BBS RC project!










New CNC alloy nuts for the BBS RS project rims!









Had to take her out for a wash!



Removed the rear bumper in search for rust, and found some! As well as I noticed the left bumper hook has been changed to the new type. Probably have been damaged on the left side.











Cables cables cables....I MUST sort this during the spring and build a proper looking and sounding stereo. It will be insulated with Dynamat as well.



Removed the carpet, and as I feared....it was WET! On both left and right side. I welded the whole floor last winter, but it is still wet. Maybe it is because I don't have the rubber on my DTM mirrors or the water seal on the door trim. Any ideas?





E36M3 3.2l EURO rear calipers, is to be sandblasted and powdercoated.



Overhauling kit for calipers from Ebay



And brackets for the rear calipers.



Today I received new 500hp++ driveshafts from PPM Racing in Australia!

[bernzpeed]

bling bling

[cale]

Great build! Love the bat too haha.

[catuned]

Nice work :)

Love it!

[Mr. Horsepower]

Piced up RS's from the paint shop today, and assambled one of them! Result is staggering! Merry christmast to you all!

[catuned]

Amazing car! Keep the updates coming when you have them. See a lot of cars but yours stands out! :)

[Mr. Horsepower]

New 2.5 inch lips for the BBS RS's



As well as new stainless valves



And gold plated bolts with new nuts



Diezel the cat approves!



The centers are now primed and wet sanded, so I delivered them back to the painter tonight. I'm doing the sanding myself you know.



After wet sanding



Aaaand a status pic ;)

[Mr. Horsepower]

Thanks!

The colour is Avusblue base, but there is added some secrets that I'm keeping for myself.

Picked the BBS RS's up from primer yesterday, so I will wet sand them today and deliver them back to the paint shop tomorrow.