I dunnno, but some big fat spacers would make those look WAY better!
1991 318is Restoration Project...Now with some Air!
Collapse
X
-
-
Well I haven't updated this thread in while due to school, but I did managed to get some more work done on the rear.
Tinted my spare tails.
I also started the car up after a month and it seems like I'm leaking fuel. I've temporary duck taped it and was just wondering is it just replacing that rubber hose? Its leaking where the rubber hose connects to the hard line.
Again don't worry about the tape its temp., will solve problem soon.Comment
-
-
What did you use to tint the lights?Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
Originally posted by Wh33lhopVANOS: sometimes you just need to go full retard.Comment
-
thanks, i got a long way to go..lol,
it was some window tint from rona or home depot i believe, on my previous car it lasted like 3-4 years with a clear on top, I'll get you the exact name tomorrowComment
-
Wonder if they also carry a smoked tint?sigpicComment
-
Comment
-
hey guys, just need some help, I'm kinda stuck now because I want to remove the bumpers to get the rest of the body work done. Problem is the bumper bolts aren't budging and I've already broke 3 T55 drives. I've tried a 2ft breaker bar, soaking it in liquid wrench and heating it up. So any suggestions?Comment
-
Haven't got much done on the car lately but I've finally managed to get the front taken off, just can't seem to get the rear bumper off, might have to just drill it out. The interior is coming along and I'm hoping to get it done before school starts. Here's some pics.
Front End Taken Apart
FatMat
Everythings a mess in and outside the car, don't worry i'll be cleaning it up soon.Last edited by Tuee; 07-30-2010, 05:39 PM.Comment
-
Well it's been a while since I've updated this, just been busy with school, but here's some progress.
Took it out for a wash, since it was covered in so much dust and also finished up laying the wires.
The carpet was crap, it had stains all over the place, but I wanted to see if I could save it, well here's the results after 20 bucks
Before
During
After 1st coat
Here's the product
Last edited by Tuee; 08-27-2010, 05:55 PM.Comment
-
Got some wiring done,
The previous owner had cut the factor harness and just twisted the wires and wrapped them in tape.
This bothered me so ordered a harness and reveres harness,
Soldered, heat shrunk and labeled,
Interior started to be put back together
Comment
Comment