Nice build, where in houston are you? Im over in spring, getting close to having my e30 back on the road. I swaped in a m52 running on ms3 with sequential fuel/ign. got it started to find a bad water pump before i can start tuning.
Announcement
Collapse
No announcement yet.
This is Sofie- Now w/ 5 lug and MT-2!
Collapse
X
-
sweet! cant wait to see it318iS Track Rat :nice: www.drive4corners.com
'86 325iX 3.1 Stroker Turbo '86 S38B36 325
No one makes this car anymore. The government won't allow them, normal people won't buy them. So it's up to us: the freaks, the weirdos, the informed. To buy them, to appreciate them, and most importantly, to drive them.
Comment
-
Originally posted by E30SPDFRK View PostHow were the prices at that junkyard? Would you be willing to get some of the e39 pieces for me?
Eh it's 3 hours away, but they do ship.
Giant Imports & Auto Parts
9592 New Laredo Highway
San Antonio, TX 78211-5502
(210) 623-5044
Originally posted by Lof8 View PostNice start. What did the yard charge you for the S50?
Originally posted by downforce22 View Postsweet! cant wait to see it
Comment
-
Soda blaster works pretty well.
Before:
After:
Popped off the flywheel, flex plate, whatever.
Rear seal be leaking. :o
Put on the mount for the stand
Got to see if my M50 mount would work with only one bolt
SUCCESS! Let the tear down begin!
AC Compressor off
Then started taking everything off of the other side
Date stamp
That's all I could do tonight. I need to get the impact after the harmonic balancer, but that requires the air compressor that's at the other house. So something to do tomorrow. ;)
Comment
-
So the next few days are going to be like Christmas.
Here's the schedule for deliveries:
Thursday:
Spal fan from JayCorp
Part of a big ass order from Pelican Parts
Friday:
Getrag 260, IX booster, and E36 brake master cylinder from Autobahn auto parts in Cali
Other part of the big ass order from Pelican - "the special order stuff"
Mishimoto radiator- eBay
Random stuff from Turner
Brake things from RM European
Carr Industries shorty headers
AKG swap mounts
Saturday:
I pick up that massive order from the Dealer
Monday:
Spec stage 2 clutch from LM Performance
Driveshaft and shift linkage from Autobahn
So yeah I'm stoked. :)
The last things I need are an intake (KA motors most likely), a 3.25-3.46lsd, and a power steering pump. That'll be everything for the driveline.
Comment
-
An unexpected surprise arrived from Canada today. A complete 325i vert body harness down to the 13 button bits. Honestly wasn't expecting this for another week going on what Canada post usually takes.
And untangled:
And some of the other things that came in today:
And some of the contents:
Everything to refresh the tranny all in one bag:
Took the impact to the engine tonight. Got the harmonic balancer, exhaust manifolds, and the AC bracket off. Can't take the oil housing off till I get something to contain the oil.
Also put back on the water pump and thermo housing to get it ready to be cleaned. Don't want dirt, etc going places it really shouldn't. ;)
Gotta figure out how to get those studs out....
My reminder to drain the oil, pulled out the dip stick without thinking.
Comment
-
To get the studs out is easy, double nut (or triple nut if necessary) each stud. Thread 2 nuts onto the stud, tighten both nuts in opposite directions, so that they lock together in place, then turn on the bottom most nut to take out the stud.
To remove the nuts from the stud simply loosen the top most nut while holding the one under it in place.
If that makes sense..
Comment
-
Whoop for partz!
My transmission also came in, but the joy was short lived.
The Carr Industries headers:
AKG Poly swap mounts:
Random parts from Turner, mainly delrin bushings for the shifter and stainless clutch line.
E34 oil pan, pump, and pick up.
And there's more, but those are the main high lights.
Comment
Comment