The Turbo 325ix build!

[Brandon12V]

SUCCESS!!1 got it all together

Lol this picture confused the fuck out of me at first. Nice progess man!

[downforce22]

It looks like you are using the ix oil pan, but if the block is from a normal m20, did you weld this together?

I'm confused how you are going to keep the awd without keeping the ix specific oil pan.
Did you weld it up to the replacement engine?

[IxTech]

It looks like you are using the ix oil pan, but if the block is from a normal m20, did you weld this together?

I'm confused how you are going to keep the awd without keeping the ix specific oil pan.
Did you weld it up to the replacement engine?

even though the the block is an "iX" block is still cast from the same mold as the normal m20s. the only differences are in the machining of a few holes here and there. that being said the oil pan bolts right up to any m20.

[merrrr]

- the cars an 98 325ix.

reeealy?

[IxTech]

:ohsnap: haha my bad. all fixed

[downforce22]

oh right I forgot the 528 is an m20 not an m30, so it should fit. more info on the turbo?

[nick_t]

GET OUT OF MY HEAD! You're building my dream e30!

Except mine's red :P Looks great, Keep up the good work

[IxTech]

have you seen this red ix? http://www.youtube.com/watch?v=RmswE...eature=related

im feeling a holset set up too...

oh right I forgot the 528 is an m20 not an m30, so it should fit. more info on the turbo?

haha that would be so dope. i know people have done 24v ix's but never heard of an m30 one! no more turbo info sorry. its going to get upgraded soon though with a REAL turbo.

[nick_t]

have you seen this red ix? http://www.youtube.com/watch?v=RmswE...eature=related

My god...

[IxTech]

Update 3/28/11

i felt pretty sick over the weekend and decided id be better off getting some rest. today was the first day back at it and i didnt get too much done. i spend more time deciding what to work on than actually doing it. i spent a lot of time dinkin around with my IC piping now that the turbo is in its final place. the only tricky part i have left is going to be mounting the IC and oil cooler an cutting my front valence to fit.

ALSO: forgot to mention some other things i did before i started the thread
full power steering delete
full A/C delete (including aux fan and condenser.)

Today i:
bolted the trans+t/c to the car
re-attached slave cylinder
installed the starter after i had the engine in...such a pain.
messed with the intercooler piping.
installed the downpipe for kicks
mocked up my ignition wires to see how the white paint looks. im thinking about doing the intake manifold the same color at some point. what do you guys think? havent really seen any alpine intakes.


hmmm...ill figure something out.


downpipe


alpine white wire thing


i wish i had an extra inch on that pipe. other than that it should fit nicely.


Friday i will be ordering my WAR chip package from miller. i wish i could afford the maf..maybe later. :up:

[325ix]

My god...

mmmm... Hennarot ix! This is a good build so far! I would love to turbo my ix this summer. Maybe if funds allow!

[IxTech]

over the last few days ive been on light duty sort of. only get a few hrs in the afternoon.
Basically ive just been finishing up all the electrical, water, and intercooler plumbing. i fabbed some shitty mounts for the intercooler and oil cooler. ill have to fab some mounts for the top too at some point. ill have some pics added to this post soon.

all i have left to do is
finish fmic plumbing
driveshafts
exhaust
ecu (miller WAR chip)
tune
bumper
cut valence to fit and respray that anti chip crap.

[einstein57]

Don't forget wideband

[IxTech]

thanks. any recommendations? would love to not spend too much

[Vtec?lol]

Inspiration!