Nicks m50 swap and restoration project

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • gofredo50
    E30 Addict
    • Oct 2010
    • 482

    #151
    Originally posted by dnick
    LOL 5 mins after i came inside i got a knock on the door... its the police. Didnt get any citations but she said they got 2 noise complants lol.. she let me off and said dont want to hear it again out of the driveway. ohhwellll
    Just watched the video and two thoughts:

    1. Your neighbors would HATE me. None of my neighbors have said anything but I gun it in the parking garage every day.

    2. If I didn't think it'd come right back to you I'd say we should form the first annual "Nick's Neighborhood Drive". There would be a full APB out for us, especially if Phaedon's RX8 gets put back together and Jeff brings the S50.
    1993 Laguna M50 "Helen"
    1987 M20 325i "Ron Burgundy"
    1987 M20 325e "Billy"

    "He who shall be last shall be sideways and smiling." - Clarkson

    Comment

    • dnick
      E30 Fanatic
      • Apr 2011
      • 1377

      #152
      Originally posted by gofredo50
      Just watched the video and two thoughts:

      1. Your neighbors would HATE me. None of my neighbors have said anything but I gun it in the parking garage every day.

      2. If I didn't think it'd come right back to you I'd say we should form the first annual "Nick's Neighborhood Drive". There would be a full APB out for us, especially if Phaedon's RX8 gets put back together and Jeff brings the S50.
      HAHAHA i think thatd be true if we did that.. its a shame I cant go to the swap meet this weekend!!

      Comment

      • irish44j
        R3VLimited
        • Oct 2011
        • 2763

        #153
        tuck those diving boards, son!
        Stage rally/rallycross e30 build/competition journal
        Track/street e21 build
        visit Condor Speed Shop
        visit Motorsport Hardware



        [FONT="Franklin Gothic Medium"] 1985 318i/M50 Rally Car - 1988 Porsche 924S - 2005 Sequoia tow pig - 2018 GTI

        Comment

        • dnick
          E30 Fanatic
          • Apr 2011
          • 1377

          #154
          Originally posted by irish44j
          tuck those diving boards, son!
          already done ;)

          did it today! haha drilled em out and backed up on to my garage lol!

          Comment

          • dnick
            E30 Fanatic
            • Apr 2011
            • 1377

            #155
            ordering exhaust tubing tomorrow!! from mandrel bending solutions.

            Comment

            • irish44j
              R3VLimited
              • Oct 2011
              • 2763

              #156
              Originally posted by dnick
              already done ;)

              did it today! haha drilled em out and backed up on to my garage lol!
              damn, I was able to push mine in by hand, bracing myself against my workbench. Convenient since you find you'll want to pull them out again to access various things here and there. You can pull them out by hand to, just use your body weight.
              Stage rally/rallycross e30 build/competition journal
              Track/street e21 build
              visit Condor Speed Shop
              visit Motorsport Hardware



              [FONT="Franklin Gothic Medium"] 1985 318i/M50 Rally Car - 1988 Porsche 924S - 2005 Sequoia tow pig - 2018 GTI

              Comment

              • dnick
                E30 Fanatic
                • Apr 2011
                • 1377

                #157
                Originally posted by irish44j
                damn, I was able to push mine in by hand, bracing myself against my workbench. Convenient since you find you'll want to pull them out again to access various things here and there. You can pull them out by hand to, just use your body weight.
                lol yeah i found that out.. one side didnt go in all the way so i just pushed it hahah, didnt need to push it against the garage hahaha. Ive heard you can do that! Just pull em out and use them for like a bench or something

                Comment

                • irish44j
                  R3VLimited
                  • Oct 2011
                  • 2763

                  #158
                  Originally posted by dnick
                  lol yeah i found that out.. one side didnt go in all the way so i just pushed it hahah, didnt need to push it against the garage hahaha. Ive heard you can do that! Just pull em out and use them for like a bench or something
                  I drilled through mine and have some pins in there to hold them compressed (just in case they want to pop out for some reason)
                  Stage rally/rallycross e30 build/competition journal
                  Track/street e21 build
                  visit Condor Speed Shop
                  visit Motorsport Hardware



                  [FONT="Franklin Gothic Medium"] 1985 318i/M50 Rally Car - 1988 Porsche 924S - 2005 Sequoia tow pig - 2018 GTI

                  Comment

                  • SamE30e
                    R3V Elite
                    • Sep 2007
                    • 4319

                    #159
                    When you do the valve cover, make sure you replace the valve cover gasket if you haven't yet.

                    And when you re-assemble it, put some gasket maker on the corners and around the spark plug tubes. When the valve cover leaks into the spark plug tubes they fill with oil, this can cause misfires.

                    As for exhaust, when I had my car, I went Y-pipe - 2.5" high flow cat - single 2.5" pipe - 2.5" resonator - 2.5" inch straight through single in dual out muffler.

                    Sounded pretty good, not too loud, but noticeable when you got on it.
                    1985 325e 2.8 Turbo VEMS

                    Comment

                    • dnick
                      E30 Fanatic
                      • Apr 2011
                      • 1377

                      #160
                      thats smart! ill have to do that if the bumper slides out at all

                      Comment

                      • dnick
                        E30 Fanatic
                        • Apr 2011
                        • 1377

                        #161
                        Originally posted by SamE30e
                        When you do the valve cover, make sure you replace the valve cover gasket if you haven't yet.

                        And when you re-assemble it, put some gasket maker on the corners and around the spark plug tubes. When the valve cover leaks into the spark plug tubes they fill with oil, this can cause misfires.

                        As for exhaust, when I had my car, I went Y-pipe - 2.5" high flow cat - single 2.5" pipe - 2.5" resonator - 2.5" inch straight through single in dual out muffler.

                        Sounded pretty good, not too loud, but noticeable when you got on it.
                        yeah, lol thats the problem im having now! gasket marker?? I was just going to order
                        http://www.blunttech.com/ShopByVehic...%20Set&mode=PA THAT lol.... thatll be ok right? and im not doing any cats, prob just a resonator and muffler. 2.5"

                        Comment

                        • dnick
                          E30 Fanatic
                          • Apr 2011
                          • 1377

                          #162
                          found some pics my dad took haha..
                          came in prety hot here, actually got sideways after he snapped the pic!!


                          Comment

                          • FunfGan
                            R3V Elite
                            • Jan 2011
                            • 4958

                            #163
                            No air filter? What a badass.


                            Go here be happy!

                            Ratchet Garage e30 V8 build.

                            Comment

                            • dnick
                              E30 Fanatic
                              • Apr 2011
                              • 1377

                              #164
                              lol you knowww

                              Comment

                              • FunfGan
                                R3V Elite
                                • Jan 2011
                                • 4958

                                #165
                                So the driveway drift was not caught on camera? That would have been an awesome first drive picture.


                                Go here be happy!

                                Ratchet Garage e30 V8 build.

                                Comment

                                Working...