DRTY 30 Project log <3

[Cronopoulos]

Purrddy m20

Thanks, I hate durrrty bays ;)

[whodwho]

I missed your fire up post, glad you got it fired up! Let me know if I can help with any of the tuning ;)

[Farbin Kaiber]

Man, that back window is trendy.

[Cronopoulos]

I missed your fire up post, glad you got it fired up! Let me know if I can help with any of the tuning ;)

All good, I may take you up on that... She's running good but conservatively rich.

Man, that back window is trendy.

Ha! Yeah most of the stickers are from all the parts on the car, temp phase.

[Farbin Kaiber]

NO dis intended, I'm just not a fan of lots of stickers, IMHO, it cheapens the car. But then again I feel that way about stickers on everything, take a look at this fridge for example...

[george graves]

I like where this is going. SUB'ed.

[CreamBeam]

i vote Heineken mini keg for a catch can

[Cronopoulos]

NO dis intended, I'm just not a fan of lots of stickers, IMHO, it cheapens the car. But then again I feel that way about stickers on everything, take a look at this fridge for example...

Oh I know, I just get tired of vinyl every now and then and start off with a clean slate. That is a perfect shop fridge lol.

I like where this is going. SUB'ed.

Thank you, will try not and disappoint ;)

[Cronopoulos]

Got some more work done with the bimmer this weekend. Had the head start making a ton of noise so a valve adjustment was done and now it sounds 10X better, car has been running/driving great since start up.

Finally got around to installing my harnesses and rear strut bar. The interior is now 95% complete, just a little more tar/carpet removal to go.

Where does this go???









Also wired in my 12" e-fan to replace the clutch fan, working great so far. When my Mishimoto gets here i will be doing a dual 10" setup -

[Cronopoulos]

Car is still running great, adjusted the valves again today as things start to get broken in more and more.

Here are some pics of the headers after install -





Installed "robsgotit" custom CNC'd delrin shift knob -



Also added a Freddy can to quiet down the exhaust until turbo time -

[lambo]

What steering wheel is that? And what were the parts that you need to use it? Also, is it a big change in position versus the stock wheel?

Sorry for all the questions! Car looks awesome!

[Cronopoulos]

What steering wheel is that? And what were the parts that you need to use it? Also, is it a big change in position versus the stock wheel?

Sorry for all the questions! Car looks awesome!

No problem at all, questions are welcome anytime!!

NRG made all the parts for the setup, in my case 3 parts. You don't have to run the quick release, you can simply bolt the steering wheel to the hub also. The steering wheel w/ the parts is probably a good 6" closer to me. The way I sit (6') driving track/auto-x makes it PERFECT. I don't adjust my seat, just remove the steering wheel to get in and out nicely.

Hub- http://www.88rotors.com/interior/ste...-srk-e30h.html

Quick release - http://www.88rotors.com/interior/ste...srk-200pp.html

Steering wheel (e30 diameter) - http://www.getnrg.com/products/steer...style/st-006bk

The only thing I don't have in that new system is a horn, i may have damage the stock piece in there when installing the hub or the hub just doesnt work with it correctly... Either way it is setup for a horn but i don't really care lol.

[lambo]

Awesome! That's everything I have been trying to figure out!

Thanks man!

[Cronopoulos]

Awesome! That's everything I have been trying to figure out!

Thanks man!

Anytime, let me know if you have any questions in the future. I am on here daily ;)

[Ludey849]

nice build.
what steering wheel hub is that?