DRTY 30 Project log <3

[Cronopoulos]

OK enough slacking, e30 picnic is creeping on me hard. The hot and cold pipes are fabricated and off at the powdercoaters for some flare -

Please ignore the location of coil, lack of BOV and the rest of that jazz lol...

[Cronopoulos]

New cluster looks so nice.'

Thanks! I need to go back through and replace bulbs, have a few burnt out now that it's all put back together :| lol

And the headlight is STILL busted.

I KNOW :hitler: lol I will replace it when there is nothing left to fix ;)

[Farbin Kaiber]

And the headlight is STILL busted.

[TYBG]

New cluster looks so nice.'

[Cronopoulos]

Awesome.... working my oil setup out now. What are you doing for a cooler and thermostat?

No cooler yet! Just running the lines out of the stock feed so i can clear the manifold nicely. The remote thermostats are pricey little buggers too!

cant wait to see this at the picnic

Thanks man, should be a fun time! Made some intercooler brackets and started to run the piping. More than likely will have to trim the valence a little but so far so good...

[SkiFree]

Awesome.... working my oil setup out now. What are you doing for a cooler and thermostat?

[2mAn]

cant wait to see this at the picnic

[Cronopoulos]

Nice, I like the filter setup! I need to re-do mine at some point.

Thanks Matt! ~60 bucks via summit racing (bolts right up) - http://www.summitracing.com/parts/TRD-1113/

Also put in the gauge panel (BIG thanks to Jaywood for an awesome product) and tested the gauges... A little more wiring and the dash goes back together.

[MR 325]

Nice, I like the filter setup! I need to re-do mine at some point.

[Cronopoulos]

Finished up installing the cluster and verified all the lights worked... hell the gas gauge works too /knocks on wood.



Show car status, who loves spaghetti???

[Cronopoulos]

Lands at airport last night. Updates thread today...


yestoddlerfist.jpg

Exactly! I lied, i worked on it a little more.. finished the remote oil filter kit. Also the oil pressure sensor and feed for the turbo are where i want it now, I just have to get a 45* -10 off the pan for clearance. The 90* fitting touches the pressure sensor.

[Farbin Kaiber]

Lands at airport last night. Updates thread today...


yestoddlerfist.jpg

[Cronopoulos]

Update or GTFO!

Yess

haha! Sorry, I just got back from a much needed vacation... Back on the grind this coming week. I did however get my cluster all finished up -

[shaferbm]

Update or GTFO!

Yess

[Boise]

Update or GTFO!